Contents Protective gear CAUTION ● Wear suitable protective clothing Safety instructions ..........and safety goggles to protect yourself from water or dirt Environmental protection........backsplash. ● Aerosols can be formed when using high- Intended use............pressure cleaners. Inhaling aerosols can be harmful for Accessories and spare parts .......
Environmental protection equipped with a system separator according to EN 12729 type BA. ● Water that has flowed through a The packing materials can be recycled. Please system separator is no longer classified as drinkable. dispose of packaging in accordance with the en- ● Never leave the device unsupervised while it is in op- vironmental regulations.
Safety devices Symbols on the device CAUTION Do not connect the device directly to the public drinking water network. Risk of injury and damage due to missing or modi- fied safety devices! Injuries and material damage Safety devices must not be bypass, removed or ren- dered ineffective.
Page 8
Installing the handle 1. Secure the handle on the device frame with the 2- thread screws and the star grip nuts. 5. Hold the square end of the coupling plug with an open-end wrench and hand-tighten the union nut. Note Removal is performed in the reverse sequence.
Filling with engine oil Selecting the jet nozzle Note ATTENTION With new devices, there is no engine oil in the crank- Risk of damage due to point or rotating jet! case of the engine, it is provided in a separate container. When using a jet nozzle with a point jet or rotary jet, ATTENTION there is a risk of damage to sensitive surfaces!
Vent the device 1. Open the water tap completely. 2. Remove the jet nozzle from the spray lance, see Replacing the jet nozzle. 3. Start the engine, see engine operating instructions. 4. Unlock the trigger of the high-pressure gun, see Trigger lock.
3. Stop the engine if the interruption of operation lasts After operation with detergent longer than 1 min, see the engine operating instruc- ATTENTION tions. Risk of damage due to dried detergent! Depressurising the device Dried detergent can damage the device. Rinse the device after each use of detergent.
13. Allow the device to cool down. Pulling or pushing the device 14. If necessary, remove the handle, see Removing the 1. Grasp the handle and tilt the device backwards via handle. the wheels by max. 45°. 15. Store the device in a frost-protected room, together with all accessories.
Page 13
5. Remove the water sieve from the union nut on the Replacing the sealing rings on the high- water spigot. pressure hose and high-pressure gun (if necessary) 1. Depressurize the device, see Depressurising the device. 2. Remove the high-pressure hose, see Mounting the high-pressure hose.
Troubleshooting guide Malfunctions often have simple causes that you can doubt, or in the case of malfunctions not mentioned remedy yourself using the following overview. When in here, please contact your authorised Customer Service. Fault Cause Rectification Various causes possible. 1.
Warranty Technical data The warranty conditions issued by our relevant sales G 3200 G 3200 company apply in all countries. We shall remedy possi- ble malfunctions on your appliance within the warranty period free of cost, provided that a material or manufac- Electrical connection turing flaw is the cause.
Page 16
THANK YOU! MERCI! DANKE! ¡ GRACIAS! Registrieren Sie Ihr Produkt und profitieren Sie von vielen Vorteilen. Register your product and benefit from many advantages. Enregistrez votre produit et bénéficier de nombreux avantages. Registre su producto y aproveche de muchas ventajas. www.kaercher.com/welcome Bewerten Sie Ihr Produkt und sagen Sie uns Ihre Meinung.
Need help?
Do you have a question about the G 3200 and is the answer not in the manual?
Questions and answers