Network Client Viewer Manual; Installation Of Network Viwer Software; System Requirement; Network Environment - Digimerge VCE304161 User Manual

Chapter 11 Network Viewer (DIGI-Client 4.0)
11.1 Installation of Network Viewer Software
11.1.1

System requirement

•
Pentium III or above recommended
• O/S : Microsoft Windows 2000 / XP
• 128MB RAM or above recommended
• Super VGA 16M or above recommended
•
10/100 base T network card for LAN operation
11.1.2

Network Environment

Minimum More than 1Mbps
Recommended
More than 3Mbps
(16 Frames/Sec)
∗ Transfer rate of image varies with the number of client accessed to DVR.
NOTE : The software, DIGI-Client is compatible with Microsoft Windows 2000 / XP.
11.1.3

Installation

To start the installation,
○ Start Windows 2000 or XP
1
○ Insert Network Client Software
2
CD into the CD-ROM drive.
○ Install Network Client Software and locate
3
network viewer file on your PC screen.
○ Simply double-click the icon to start.
4
○ Input your desired password and
5
press the enter key.
○ And the main menu controller of network viewer
6
will appear on the screen.
11.2

Connecting to DVR

Please double-click the icon of Network viewer, and then the following main menu controller will
appear on the PC screen.
DIGITAL VIDEO RECORDER
DYNAMIC DDNS SERVER SETUP
Client PC DVR
More than 0.5Mbps
More than 3Mbps
97