STARLINK GEN 3 ROUTER MOUNT Installation Manual
Hide thumbs
Also See for GEN 3 ROUTER MOUNT:
- Installation manual ,
- Setup manual (6 pages) ,
- Setup manual (5 pages)
Advertisement
Quick Links
Advertisement
Related Manuals for STARLINK GEN 3 ROUTER MOUNT
Summary of Contents for STARLINK GEN 3 ROUTER MOUNT
- Page 1 | GEN 3 ROUTER MOUNT INSTALL GUIDE...
- Page 2 GEN 3 ROUTER MOUNT KIT What’s in the Box Router Mount Screws Wall Anchors Recommended Tools Drill / Impact Driver Drill Bit Drill Bit #2 Phillips Marker Level 4 mm (5/32 in) 7 mm (9/32 in) Screwdriver No Anchors With Anchors 132.5 mm...
- Page 3 Screw Mount to Surface Secure the Mount using the provided screws. Route Cables and Plug into Router Route the power and Starlink cables through the opening in the mount and plug the cables into the router. Snap the Router into Mount Fit the bottom edge of the router into the mount, then press the router into the mount until it clicks into place.
- Page 4 Install the drywall anchors into the holes, then secure the mount using the provided screws. Route Cables and Plug into Router Route the power and Starlink cables through the opening in the mount and plug the cables into the router. Snap the Router into Mount Fit the bottom edge of the router into the mount, then press the router into the mount until it clicks into place.
Need help?
Do you have a question about the GEN 3 ROUTER MOUNT and is the answer not in the manual?
Questions and answers