Yolink X3 Installation & User Manual page 17

Installation, Continued
I
*Suitable surfaces are metallic surfaces
responsive to magnets, that allow for a good
bond with the sensor's built-in magnet. Uneven,
irregular, textured, grooved, etcetera, surfaces
may not be suitable. Surfaces subject to
vibration and movement are not likely to be
acceptable. Verify the surface is suitable and the
sensor is secure, as physical damage to the
sensor is not covered by the warranty.
Other mounting methods
Follow the manufacturer instructions if
mounting your sensor by alternative methods,
such as with Velcro or double-sided mounting
tape. If using an adhesive method, is it
recommended to clean and dry the surface, first.
Consider the possibilty of replacing or relocating
the sensor later, when choosing alternative
mounting methods.
Prepare to use your sensor
Allow your sensor around an hour to stabilize
and display the correct readings on the LCD
display and in the app. If you believe your sensor
readings are inaccurate, first refer to Sensor
Calibration, page 24.
15