Installation - Yolink X3 Installation & User Manual

Installation

I
Location & Mounting Considerations
The X3 Outdoor Temperature & Humidity Sensor
is designed to be easy to install, and portable,
but before installing the sensor, the following
items should be considered:
While the X3 Outdoor Temperature &
Humidity Sensor is designed for outdoor
use, do not use the sensor outside of the
environmental temperature range, per the
product specifications (refer to the
product's support page).
The sensor body is designed for outdoor
use, but do not allow it to be submerged.
Do not use the sensor near sources of
extreme hot or cold, as this can affect
accurate ambient temperature readings, and
in some cases may damage the sensor.
As with most electronic devices, even if
intended for outdoor use, the useful life of
the device can be extended if it is protected
from the elements. Direct intense sunlight,
rain and snow over an extended period can
discolor or damage the device. Consider
placing the sensor where it has overhead
cover and/or protection from the elements.
Place the sensor where it will be out of
reach of children.
10