Yolink X3 Installation & User Manual page 13

Installation, Continued
I
The X3 Outdoor Temperature & Humidity Sensor
can be installed or mounted in at least one of
four ways:
1. Lay the sensor flat on any stable surface, or
placed within an enclosure.
2. Hang the sensor from a nail, screw, or hook,
using one or all of the three mounting holes on
the rear of the sensor (mounting hardware not
included).
3. Secure the sensor to a wall or vertical surface
using the magnet feature with the included metal
plate, or by placing it on a suitable surface (that
responds to a magnet) without the included
plate.
4. Secure the sensor to a wall or vertical surface
using alternative fasteners or adhesive methods,
such as double-sided mounting tape or Velcro
(not included).
11