Kyocera KM-2530 Operation Manual page 92

4. Selecting the Printer Settings
4-7 Paper settings
About the paper settings
It is possible to perform paper settings for the 5 items shown in the following chart.
For the most efficient use of the printer functions, select the various settings according to your printing needs.
1
Bypass mode
If "First" is selected here and there is paper set in the
bypass table, paper feed will be accomplished from the
bypass table.
2
Paper Feed Source
Selects the paper cassette that will be selected first.
3
Duplex mode
4
Stack select
Selects where the printing paper will be ejected.
5
A4/Letter (8 1/2 x 11) usage ON/OFF
Allows both A4 and Letter (8 1/2 x 11) size paper to be
utilized as though they were the same size.
Item Available settings
Cassette, First
Bypass
Cassette1
Cassette2
Cassette3
Cassette4
None, Short edge bind, Long
edge bind
Inner tray, Job separator, Finisher
main tray, Finisher sub tray,
Mailbox (Face-Up), Mailbox
(Face-Down)
OFF, ON
4-23
Remarks
Cassette 3 and Cassette 4 are
displayed only when they are
installed.
Displayed only when the optional
Duplex Unit is installed.
Units other than the inner tray are
displayed only when the optional Job
Separator or the Finisher is installed.