Using the Printer Status Display
The Printer Status Display provides you with a variety of useful
information about the current status of your printer.
Opening the Printer Status Display
Before opening the Printer Status Display, make sure that the printer is
connected to your computer with the parallel interface cable.
Use the procedure below to open the Printer Status Display.
Note
• The Printer Status Display opens automatically when you startup
your computer if you checked the "Setup to start Status Display auto-
matically" option when you installed the printer driver. If you did not
select the above option, you must open the Printer Status Display
using the procedure below.
To open the Printer Status Display
Click
, point to
Start
then click
Minolta Status Display 25
• This operation will open the screen which is shown on page 5-2.
Using the Printer Status Display
, point to
Programs
.
Minolta Printer Utilities,
and
5-1