To reset the counter of the image transfer roller
1
Connect the power cord to the printer and turn on the printer.
2
Press the On Line key in order to take the printer offline.
3
Press the Menu key repeatedly until the
appears, and press the Item key until the
appears.
4
Press the Select key. When the
appears, press the Enter key. The "RESET OK?" message will
appear.
5
Press the Enter key again to reset the counter of the image trans-
fer roller. Make sure that the
disappears after resetting the counter.
6
Press the On Line key to return to the READY mode.
Use the one of the following procedures to make sure that the
counter has been reset.
• Press the On Line key to take the printer offline and make sure
that "100% REMAINED" is displayed instead of "MAINTE-
NANCE REQ" on the MAINTENANCE menu.
• Press the On Line key to take the printer offline and print a con-
figuration page from the TEST PRINT MENU. Make sure that
the "Transfer Roller Counter" displays "100% REMAINED" on
the COUNTER field.
Replacing the Maintenance Kit
MAINTENANCE
TRANSFER LIFE
RESET LIFE COUNT
MAINTENANCE REQ2
menu
menu
message
message
6-15