The hardware devices to be stopped will be dis-
played. Highlight the device by clicking on it then click
"Stop."
A confirmation screen will appear to indi-
cate the devices to be stopped. Clicking
"OK" will stop the device.
A third and final screen will appear to
indicate the camera can be safely discon-
nected from the computer; click OK. Turn
the mode dial to another position and
then disconnect the USB cable.
Macintosh
Confirm the indicator lamp is not lit and then drag the mass-storage device icon and drop it into the
trash.
Disconnect the USB cable and turn off the camera.
• If the USB cable is disconnected before performing the first step, an alert message will appear.
Always complete the first step before disconnecting the USB cable.
83