Data-Transfer Mode; Dimage Xi System Requirements - Minolta Dimage Dimage Xi Instruction Manual

D -
ATA TRANSFER MODE

DATA-TRANSFER MODE

Read this section carefully before connecting the camera to a computer. Details on using and
installing the DiMAGE Viewer software are found in the supplied software manual (PDF). The
DiMAGE manuals do not cover the basic operation of computers or their operating systems; please
refer to the manual supplied with your computer.

DiMAGE Xi system requirements

For the camera to be connected directly to the computer and used as a mass-storage device, the
computer must be equipped with a USB port as a standard interface. The computer and the
operating system must be guaranteed by their manufacturers to support USB interface. The following
operating systems are compatible with the camera:
IBM PC / AT Compatible Macintosh
Windows 98, 98SE, Me, 2000 Mac OS 8.6 ~ 9.2.2,
Professional, and XP. Mac OS X 10.1 ~ 10.1.5
Check the Minolta web site for the latest compatibility information:
North America: http://www.minoltausa.com
Europe: http://www.minoltasupport.com
Users with Windows 98 or 98 second edition will need to install the driver software on the included
DiMAGE software CD-ROM (p. 75). Users with Mac OS 8.6 will need to download and install a USB
mass-storage device from the Apple web site (p. 78). No special driver software is required for other
Windows or Macintosh operating systems.
Customers who have bought a DiMAGE 7, 5, S304, S404, 2330, or X digital camera and have
installed the Windows 98 driver software must repeat the installation procedure. The updated version
of the driver software included on the supplied DiMAGE software CD-ROM is required for the
operation of the DiMAGE Xi with a computer. The new software will have no affect on the
performance of the DiMAGE 7, 5, S304, S404, 2330, or X.
72