Changing the memory card - data-transfer mode
Care should be taken when changing memory cards while the camera is attached to a computer.
Data could be lost or damaged if the camera is not disconnected properly.
Windows 98 and 98SE
1. Turn off the camera.
Never remove the USB
2. Disconnect the USB cable.
cable while the viewfinder
3. Change the memory card.
4. Reconnect the USB cable.
indicator lamp is lit!
5. Turn on the camera to remake the
USB connection.
Windows Me, 2000 professional, and XP
1. Stop the USB connection using the unplug-or-eject-hardware routine (p. 74).
2. Turn off the camera.
3. Disconnect the USB cable.
4. Change the memory card.
5. Reconnect the USB cable.
6. Turn on the camera to remake the USB connection.
Macintosh
1. Stop the USB connection by dragging the drive icon into the trash (p. 75).
2. Turn off the camera.
3. Disconnect the USB cable.
4. Change the memory card.
5. Reconnect the USB cable.
6. Turn on the camera to remake the USB connection.
79