Macintosh - Minolta DIMAGE EX - SOFTWARE Software Instruction Manual

INSTALLING THE SOFTWARE

Macintosh

Before Installation
• The virus protection function expansion program and the control panel documentation may cause
problems with operation of the installer. Either remove
this software from the system prior to installation, or halt its operation temporarily during installation.
Start the Macintosh.
Close all applications.
Insert the supplied Dimâge EX CD-ROM in the CD-ROM drive.
Double-click on the CD-ROM icon.
• The contents of the CD-ROM are displayed as follows.
Double-click on the Installer icon.
Double-click on the Installer icon.
• The Installer window appears.
12
Click on Continue.
• The Software License Agreement appears on the screen.
• Read this license carefully before installing the software.
• If you do not agree with the Software License Agreement, click on Do Not Agree to halt installation.
Click on Agree.
• The Easy Install screen appears. The drive and folder in which the software is to be installed is
displayed at the bottom left of the screen.
Confirm the selected folder. To change folders or create a
folder, click on Select Folder... .
Select the installation type from
the pop-up menu.
• The install setup screen at left appears if Custom
• Click on the check box at the left of the file to be installed to place an X inside it. Click on the 'left'
arrow to change it to a 'down' arrow and display a list of included files. Select each file in turn.
• Click on i at the right to display the information for the relevant file.
Select the installation type
Click to select an existing folder or create a
new folder in which the software is to be
installed
Drive and folder in which the software is to
be installed
Install is selected.
Continued on Next Page.
13