Focus Lock; Focus Range - Minolta Dimage Dimage Xi Instruction Manual

Konica minolta dimage dimage xi: instruction manual

Table of Contents

ECORDING MODE

Focus lock

The focus-lock function is used when you want to compose the image with the subject off-center and

outside the focus frame. Focus lock may also be used when a special focusing situation prevents the

camera from focusing on the subject. This function is controlled with the shutter-release button.

The focus range is 25cm (0.8ft.) to infinity. Both the LCD monitor and viewfinder can be used to

frame the subject. However, because of parallax, only the monitor's live image will be accurate with

subjects closer than 1m (3ft.) at the zoom lens' wide-angle position or 3m (10ft) at the telephoto posi-

tion.

Place the subject within the monitor focus frame or center the

subject in the viewfinder. Press and hold the shutter-release

button partway down to lock the focus.

• The focus signal on the monitor and the

viewfinder indicator lamp will indicate if the

focus is locked.

Without lifting your finger from the shutter-release button,

recompose the subject within the image area. Press the shutter-

release button all the way down to take the picture.

Table of Contents

Dimage xi