Table of Contents
Advertisement
D
-
ATA
TRANSFER MODE
Connecting to Mac OS 8.6
To access this camera with a computer with Mac OS 8.6, the USB storage support 1.3.5.smi must be
installed first. This software is supplied by Apple Computer, Inc. free of charge. It can be downloaded
from the Apple web site at http://www.apple.com.
To download and install this software, follow the instruction
on the Apple web site. Always read the attached terms and
conditions before installing any new software.
QuickTime system requirements
QuickTime 5 is used for viewing movie clips and
playing audio files. To install QuickTime, follow
the instructions in the installer. Macintosh users
can download the latest version of QuickTime
free of charge from the Apple Computer web
site: http://www.apple.com.
Auto power off – data-transfer mode
If the camera does not receive a read or write command within ten minutes, it will shut down to save
power. When the camera shuts down, an unsafe-removal-of-device warning may appear on the com-
puter monitor. Click "OK." Neither the camera or computer will be damaged in this operation. Unplug
the USB cable and turn off the camera. Remake the USB connection by reattaching the cable and
turning the camera on.
78
IBM PC / AT Compatible
Pentium-based computer
Windows 95, 98, 98SE, NT, Me,
or 2000 Professional, XP
32MB or more of RAM
Sound Blaster or compatible sound card
DirectX 3.0 or later recommended
Advertisement
Table of Contents
