velorian Blinkerset AZUB Manual

© velorian GmbH, Storkower Str. 115A, 10407 Berlin, Germany - https://velorian.de/
Urban Arrow Family
Installation
Schematic representation
1
7 Rahmen
hinten
1
1. mini LED indicators with rubber caps on bracket GBHV3
2. short LED running light indicators with rubber caps on universal
bracket long
3. Daytona Double Push Button
4. splitter with 1 x 3-pin connection to the indicators and 1 x 3-pin
connection with white marking to the switch
5. Blinkerbox
Turn signal mounting front
Switch assembly
The indicator switch is mounted on the handlebar on the left-
hand side as shown in Fig. 2. The status LED is mounted on the
right-hand side of the handlebar.
On the cable splitter, the 3-pin plug is connected to the switch
and the 2-pin plug to the status LED.
The cable splitter to the switch and status LED can be routed
through the steering column from top to bottom to the 3-pin
connector on the front splitter of the indicator box (white
marking).
Version DE.01.2024.01.02
BLINKERSET
8
5
linke Seite
4
rechte Seite
6. splitter with 2 x 2-pin connection to the indicators
7. rear splitter with 2 x 2-pin connection to the indicators
8. 2-core power supply cable
9. splitter connection to switch and status LED
10. toggle switch
11. Status LED
To mount the front indicators, the prepared indicator bracket is
screwed to the front of the Cargobox using the existing screws
behind the headlight.
See Fig 1
.
The cable with the red marking is for connecting the right-hand
indicator in the direction of travel.
The connection cable is routed from the front to the rear along
the cable duct on the left-hand side below the Cargobox and
connected to the unmarked cable on the front splitter of the
indicator box.
Fig. 1
Fig. 2
velorian Blinkerset AZUB
6
2
vorn
10
9
11
Seite 1/4