velorian Blinkerset HP Scorpion fs/fx Manual

© velorian GmbH, Storkower Str. 115A, 10407 Berlin, Germany - https://velorian.de/
Installation
General safety instructions
The velorian e-bike indicator set Plug&Ride may contain small parts that could be swallowed by small children.
There is a risk of injury when handling the cables and tools.
We recommend installation in a specialised workshop.
The electronics in the blinkerbox are protected against polarity reversal. This means that reversing the connection cables (mixing up plus and
minus) on indicators, switches or the power supply will not destroy the electronics or the connected components.
Scope of delivery
In addition to the individually packaged components, all cables and splitters are usually packed together in the blinkerbox.
This includes:
• 6-pin cable (violet) to the front of the handlebars
• 3-pole cable (yellow) to the rear
• 2-pole cable to the front indicators
Cable splitter (3-pin) for the rear indicators
•
Front splitter - Switch - Indicator Plug&Ride
•
The extension cables are available in lengths of 10 cm, 20 cm, 30 cm, 50 cm and 100 cm to suit the respective frame size.
See https://shop.velorian.de/Cable-and-Splitter-Plug-and-Ride
General installation instructions
The blinkerbox is splash-proof. Nevertheless, the side with the two cables and the opening of the sounder should be attached in such a way
that no water can collect on the sounder. This side should point downwards.
Make sure that the plug and socket are correctly aligned before making the connection! Otherwise, the pins could bend when plugging
together, especially the multi-pin plugs.
Version DE.01.2024.10.17
BLINKERSET
HP Scorpion fs/fx
velorian Blinkerset HP Scorpion fs/fx
Seite 1/6