velorian E-BIKE PF Mobilty Disco Manual

© velorian GmbH, Storkower Str. 115A, 10407 Berlin, Germany - https://velorian.de/
General safety instructions
The velorian e-bike indicator set Plug&Ride may contain small parts that could be swallowed by small children.
There is a risk of injury when handling the cables and tools.
We recommend installation in a specialised workshop.
The electronics in the blinkerbox are protected against polarity reversal. This means that reversing the connection cables (mixing up
plus and minus) on indicators, switches or the power supply will not destroy the electronics or the connected components.
Scope of delivery
In addition to the individually packaged components, all cables and splitters are usually packed together in the blinkerbox.
This includes:
• 6-pin cable (violet) to the front of the handlebars
• 3-pole cable (yellow) to the rear
• a cable splitter for connecting the front indicators and switches
• one 3-pin to 2x2-pin cable splitter for the rear indicators
The extension cables are available in lengths of 10 cm, 20 cm, 30 cm, 50 cm and 100 cm to suit the
respective frame size.
See https://shop.velorian.de/Cable-and-Splitter-Plug-and-Ride
General installation instructions
The blinkerbox is splash-proof. Nevertheless, the side with the two cables and the opening of the sounder should be attached in such
a way that no water can collect on the sounder. This side should point downwards.
Make sure that the plug and socket are correctly aligned before making the connection! Otherwise,
the pins could bend when plugging together, especially the multi-pin plugs.
Version EN.01.2024.09.26
E-BIKE
PF Mobilty Disco
velorian Blinkerset PF Mobility
Page 1/6