Before Using The Product For The First Time; Set The Clock; Control Lock - Midea MER30B14ASTC User Manual

BEFORE USING THE PRODUCT FOR THE FIRST TIME:

1. Ensure all packaging, literature, removable labels, and protective plastic film
are removed. Check inside oven, inside drawer, and around door and trim
edges carefully.
2. While cool, wipe down all surfaces, including inside oven and drawer, with
a damp cloth to remove dust that may have settled during shipping and
storage.
3. Please read this manual carefully and keep it properly before use.
4. Please confirm whether the oven can operate normally and the list of
accessories. If the oven doesn't work properly, please call Midea Customer
Service Center at 1-866-646-4332 or go to midea.com/us/support
immediately.
5. Start the oven in BAKE mode at the highest available temperature setting.
Allow oven to run for 1 hour to remove any dust or impurities. There will be a
distinctive odor - this is normal. Ensure your kitchen is well ventilated during
this conditioning period.

SET THE CLOCK

Before setting the clock, make sure the oven and timer are off.
1. In standby mode, press the "TIMER/CLOCK" key twice, and the hour digit
will start flashing
2. Press the"+/-"pad to adjust the hour position.
3. Press the "TIMER/CLOCK" key or the "START/ENTER" key to confirm, and
the minute digit will start flashing
4. Press the "+/-" key to adjust the minute position.
5. Press the "START/ENTER" key to complete the clock setting.
NOTE
Clock is in a 12 hour format.

CONTROL LOCK

Allows user to disable the buttons on the control to prevent accidental
operation of the oven from pets or children, or while cleaning controls. For
safety reasons, the "CLEAR/OFF" button is never disabled.
Directions:
1. Hold "+" and "-" keys for 3 seconds to activate Control Lock feature.
2. In the Control Lock, Hold "+" and "-" keys for 3 seconds to deactivate this
feature.
NOTE
1. CONTROL LOCK can be enabled after a baking mode has been started.
2. If TIMER is running, when CONTROL LOCK has been activated, the TIMER
can be canceled by pressing "CLEAR/OFF" key.
EN-19