Lightburn Operation Tutorial - ComMarker Omni User Manual

13
Lightburn Operation Tutorial (For MacOS) Lightburn Operation Tutorial (For MacOS)
1. Download and install Lightburn software from the website Download and install Lightburn software from the website
Note: It is not compatible with our machine if your Lightburn version is lower than V1.3.01, please Note: It is not compatible with our machine if your Lightburn version is lower than V1.3.01, please Note: It is not compatible with our machine if your Lightburn version is lower than V1.3.01, please
download a new version and reinstall. download a new version and reinstall.
And Lightburn is a paid software with 1 month free trial, you need to buy the licence key for Galvo version.
1. Down load the software from the website: load the software from the website:
https://lightburnsoftware.com/pages/download-triald https://lightburnsoftware.com/pages/download
3.Copy the folder "Omni 1" from the USB to the desktop
5.Import EZCAD Config and select the folder 5.Import EZCAD Config and select the folder
with 1 month free trial, you need to buy the licence key for Galvo version. with 1 month free trial, you need to buy the licence key for Galvo version.
from the USB to the desktop
2.Find downloaded file Lightburn V1.7 d downloaded file Lightburn V1.7.01, and drag
Lightburn icon to the Applications folder Lightburn icon to the Applications folder
4. A device window will pop out if the software is open 4. A device window will pop out if the software is open
the first time, click "Create Manually Create Manually", Select "JCZFiber"
Note: Make sure the machine is on and connected Note: Make sure the machine is on and connected
6.Select folder "EZCAD for "EZCAD for Omni 1"---->" Plug", and
choose "markcfg7" and click and click "next"