Samoa Dali LAK18957/1 Instruction Manual
  1. Manuals
  2. Brands
  3. Samoa Manuals
  4. Water Pump
  5. Dali LAK18957/1
  6. Instruction manual

Samoa Dali LAK18957/1 Instruction Manual

Airless electric diaphragm pump
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
www.larius.com
DALÍ suction system
LAK18957/1
- motor 220V - fitting 1/4" - 220bar + hose + gun
DALÍ suction system
LA18900/1
- motor 220V - fitting 1/4" - 220bar
DALÍ suction system
LAK18958/1
- motor 110V - fitting 1/4" - 220bar + hose + gun
DALÍ suction system
LA18920/1
- motore 110V - fitting 1/4" - 220bar
DALÍ tank 50 L
LAK18945/1
- motor 220V - fitting 1/4" - 220bar+ hose + gun
DALÍ tank 50 L
LA18945/1
- motor 220V - fitting 1/4" - 220bar
IT
https://www.larius.com/wp-content/uploads/DALI_I.pdf
EN
https://www.larius.com/wp-content/uploads/DALI_UK.pdf
DE
https://www.larius.com/wp-content/uploads/DALI_D.pdf
FR
https://www.larius.com/wp-content/uploads/DALI_F.pdf
Airless electric diaphragam pump
ES
https://www.larius.com/wp-content/uploads/DALI_SP.pdf
RU
https://www.larius.com/wp-content/uploads/DALI_RU-1.pdf
PL
https://www.larius.com/wp-content/uploads/DALI_PL.pdf
PT
https://www.larius.com/wp-content/uploads/DALI_P.pdf
EN
Dalì

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Dali LAK18957/1 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Samoa Dali LAK18957/1

Summary of Contents for Samoa Dali LAK18957/1

  • Page 1 www.larius.com Airless electric diaphragam pump Dalì DALÍ suction system LAK18957/1 - motor 220V - fitting 1/4" - 220bar + hose + gun DALÍ suction system LA18900/1 - motor 220V - fitting 1/4" - 220bar DALÍ suction system LAK18958/1 - motor 110V - fitting 1/4" - 220bar + hose + gun DALÍ...
  • Page 2 DALI' This manual is to be considered as an English language translation of the original manual in Italian. The manufacturer shall bear no responsibility for any damages or inconveniences that may arise due to the incorrect translation of the instructions contained within the original manual in Italian. Due to a constant product improvement programme, the factory reserves the right to modify technical details mentioned in this manual without prior notice.
  • Page 3 WE ADVISE THE USE OF THIS EQUIPMENT ONLY BY PROFESSIONAL OPERATORS. ONLY USE THIS MACHINE FOR USAGE SPECIFICALLY MENTIONED IN THIS MANUAL. Thank you for choosing a SAMOA. product. As well as the product purchased, you will receive a range of support services enabling you to achieve the results desired, quickly and professionally.
  • Page 4 DALI' WARNINGS The table below provides the meaning of the symbols used in this manual in relation to using, earthing, operating, maintaining, and repairing of this equipment. • Read this operator’s manual carefully before using the equipment. • An improper use of this machine can cause injuries to people or things. •...

  • Page 5: Conditions Of Guarantee

    DALI' TRANSPORT AND SAFETY RULES UNPACKING • THE EMPLOYER SHALL TRAIN ITS EMPLOYEES ABOUT • The packed parts should be handled as indicated in the ALL THOSE RISKS STEMMING FROM ACCIDENTS, ABOUT symbols and markings on the outside of the packing. THE USE OF SAFETY DEVICES FOR THEIR OWN SAFE- TY AND ABOUT THE GENERAL RULES FOR ACCIDENT •...

  • Page 6: Electrical Safety Precautions

    DALI' ELECTRICAL SAFETY PRECAUTIONS • NEVER MODIFY ANY PART IN THE EQUIPMENT. CHECK REGULARLY THE COMPONENTS OF THE SYSTEM. REPLACE THE PARTS DAMAGED OR WORN. • Check the "ON/OFF" switch is on the "OFF" position before connecting the cable to the mains. •...

  • Page 7: Working Principle

    DALI' WORKING PRINCIPLE The DALÍ unit is defined as an “electric diaphragm pump”. An ates a vacuum. The product is sucked up, pushed towards the electric diaphragm pump is used for high pressure paint spraying pump outlet and sent to the guns through the flexible hose . A without air (known as “airless”).

  • Page 8: Description Of The Equipment

    DALI' DESCRIPTION OF THE EQUIPMENT Fig. 1 Pos. Description Pos. Description LARIUS AT 250 gun Suction tube High pressure feed tube Colour body Carriage Hydraulic body Electric / combustion motor Recirculation valve Hydraulic oil filling cap Feed tube connection Setting valve Recirculation pipe connection Manometer Product suction tube connection...
  • Page 9 DALI' SETTING-UP HOSE AND GUN CONNECTIONS • Connect the high pressure flexible hose to the pump and to the gun, ensuring to tighten the fittings (the use of two wrenches is suggested). • It is recommended to use the hose provided with the standard kit (ref.

  • Page 10: Washing Of The New Equipment

    DALI' • Point the gun at a container keeping the trigger pressed (so as to drain the oil inside) till a clean solvent comes out. Now, Fig. 6 WASHING OF THE NEW EQUIPMENT Fig. 9 • The equipment has already been adjusted at our factory with light mineral oil left inside the pumping group as protection.

  • Page 11: Start Of The Painting Operations

    DALI' WORKING Fig. 1 START OF THE PAINTING OPERATIONS the idle speed. Use the tooling after performing all the SETTING UP ope- • rations above described. • Make sure the product recycles from the return tube (I4). • Dip the suction pipe (1) into the product tank. •...
  • Page 12 DALI' CLEANING AT THE END WORK • Reduce pressure to the minimum (turn counterclockwise the pressure control knob (1) ). Fig. 2 Fig. 1 • Press the ON/OFF switch (2) placed on the box of the electric motor, to stop the equipment. •...

  • Page 13: Routine Maintenance

    DALI' ROUTINE MAINTENANCE specific solvents depending on the type of paint used and refit all parts by inverting the removal order. TOP UP HYDRAULIC OIL With each start up, check the hydraulic oil level by looking through the gauge (1) on the side of the hydraulic body. If necessary, use to top up the level: AGIP DICREA 150 type hidraulic oil Fig.
  • Page 14 DALI' Fig. 5 Fig. 7 Fig. 6 CLEANING THE MOTOR COOLING FAN GUARD Clean the motor cooling fan protection guard (K6) periodically to ensure the best cooling. Fig. 8 WARNING PLATE Fig. 1 ED. 17 - 11/2024 - Cod. 150101...
  • Page 15 DALI' CORRECT PROCEDURE OF DECOMPRESSION • Insert the gun clamp (1). • Move the ON/OFF switch (2) to the OFF position to stop the equipment. • Set the valve (3) at its minimum pressure setting (turn counterclockwise). Fig. 1 Fig. 2 Fig.

  • Page 16: Problems And Solutions

    DALI' PROBLEMS AND SOLUTIONS Problem Cause Solution The equipment does not start Lack of voltage; Check the correct connection to the power supply; Considerable drops in mains voltage; Check the extension cable; ON-OFF switch disconnected; Ensure the ON-OFF switch is on the “ON”...
  • Page 17 DALI' ED. 17 - 11/2024 - Cod. 150101...
  • Page 18 DALI' COMPLETE HYDRAULIC BODY WARNING: always indicate code and quantity for each part required. Fig. 1 ED. 17 - 11/2024 - Cod. 150101...
  • Page 19 DALI' Pos. Code Description Pos. Code Description LA18932 Petrol identification plate Electric motor mono-phase 220V 50Hz LA18925 complete LA18933 Identification plate 380V 50Hz Electric motor mono-phase 110V 60Hz LA34020 Rivet LA18926 complete LA32007 Oil inspection window Electric motor three-phases 380V 50Hz LA32006 Plug LA18924...

  • Page 20: Petrol Engine

    DALI' PETROL ENGINE WARNING: always indicate code and quantity for each part required. Fig. 1 ED. 17 - 11/2024 - Cod. 150101...
  • Page 21 DALI' Fig. 2 Fig. 3 Pos. Code Description Pos. Code Description LA18344 Screw LA18260 Complete gearbox – petrol membrane version LA95114 Washer Complete gearbox kit – Dalì petrol version B+C+D LA18340 LA18268 Hydraulic flange with trolley LA81009 Dowel LA18347 Complete Dalì liner kit LA18269 Reduction LA4415...

  • Page 22: Vertical Version

    DALI' COMPLETE COLOUR BODY WARNING: always indicate code and quantity for each part required. VERTICAL VERSION Fig. 1 ED. 17 - 11/2024 - Cod. 150101...
  • Page 23 DALI' Pos. Code Description Pos. Code Description LA18951 Vertical colour body LA33021 Shutter guide LA83033 Valve assembly LA33022 Spring LA33026 Gasket LA33023 Washer LA33027/2 Ball seat LA33024 Nut LA33027/1 Valve housing LA96099 Seal sleeve LA33028 Ball LA18922 Recirculation valve assembly LA33029 Spring seat LA33012...

  • Page 24: Horizontal Version

    DALI' HORIZONTAL VERSION Fig. 2 Pos. Code Description Pos. Code Description LA18915 Standard colour body LA33018 Gas-ring LA83033 Valve assembly LA33019 Conical shutter LA33026 Gasket LA33020/1 Spear valve seat LA33027/2 Ball seat LA33020 Valve body LA33027/1 Valve housing LA33021 Shutter guide LA33028 Ball LA33022...

  • Page 25: Suction System

    DALI' SUCTION SYSTEM WARNING: always indicate code and quantity for each part required. Fig. 1 Pos. Code Description LA85009 Suction systems LA85010 Suction tube LA16609 Recirculation tube LA18096 Spring LA85012 Filter of suction ED. 17 - 11/2024 - Cod. 150101...

  • Page 26: Electric Motor

    DALI' TROLLEY WARNING: always indicate code and quantity for each part required. ELECTRIC MOTOR Fig. 1 Pos. Code Description Pos. Code Description LA18911 Trolley assembly LA18913 Trolley frame LA95159 Plug LA37218 Pneumatic wheel LA18912 Handle LA91047 Washer LA18914 Bushing LA12454 Feet LA18902 Split pin...
  • Page 27 DALI' PETROL ENGINE Fig. 2 Pos. Code Description Pos. Code Description LA12355 Trolley assembly LA84007 Split pin LA12454 Foot LA12711 Trolley handle LA12710 Trolley base LA12473 Plug LA37218 Pneumatic wheel LA91047 Elastic washer ED. 17 - 11/2024 - Cod. 150101...
  • Page 28 DALI' ED. 17 - 11/2024 - Cod. 150101...

  • Page 29: Ce Declaration Of Conformity

    DALI' CE DECLARATION OF CONFORMITY Company LARIUS srl Via Antonio Stoppani 21 - 23801 Calolziocorte (LC) ITALY Tel: +39 0341 621152 Fax: +39 0341 621243 E-mail: larius@larius.com Declares under his owns resonsibility that the product: DALI' Electric diaphragm pump complies with the directives: - EC Directive 2006/42 Machinery Directive - EU Directive 2014/30 Electromagnetic Compatibility (EMC) - EU Directive 2014/35 Low Voltage (LVD)
  • Page 30 TEL. +1 (828) 645-2290 - FAX: +1 (828) 658 0840 TEL.: +44 1942 850600 - FAX: +44 1942 812160 ©Copyright, SAMOA INDUSTRIAL, S.A. SAMOA Industrial, S.A. is an ISO 9001, ISO 14001 and ISO 45001 certified company. Contact us today! Visit www.samoaindustrial.com for more information.

This manual is also suitable for:

Dali la18900/1Dali lak18958/1Dali la18920/1Dali lak18945/1Dali la18945/1

Table of Contents