PANCONTROL PAN MV-1000A Manual

Manual
PAN MV-1000A
Voltage Tester
1. Introduction
Thank you for purchasing PANCONTROL. Since 1986, the PANCONTROL brand has
stood for practical, innovative and professional measuring instruments. We hope
you enjoy using your new product and we are convinced that it will serve you well
for many years to come.
Please read this operating manual carefully before using the device to become
familiar with the proper handling of the device and to prevent faulty operations.
Please follow all the safety instructions. Nonobservance cannot only result in
damages to the device but in the worst case can also be harmful to health.
2. Scope of delivery
After unpacking please check the package contents for transport damage and
completeness.
•
Measurement device with Handset
•
2 x Probes 4mm (for screwing on)
•
2 x Probe cover
•
Protective cover
•
Operating manual
3. Safety Instructions
To ensure the safe use of the device, please follow all the safety and operating
instructions given in this manual.
•
Before using the device, make sure that test leads and the device are in good
condition and the device is working properly (e.g. by connecting to known
voltage sources).
•
The device may not be used if the housing or the test leads are damaged, if
one or more functions are not working, if functions are not displayed, or if
you suspect that something is wrong.
•
If the safety of the user cannot be guaranteed, the device may not be
operated and secured against use.
•
Never connect the device to voltage or current sources that exceed the
specified maximum values.
•
Never touch conductive parts or bare wires.
•
Do not use the device in any higher category than allowed.
•
While using this device, hold the test leads only behind the finger guards - do
not touch the probes.
•
Never ground yourself while making electrical measurements. Do not touch
any exposed metal pipes, fittings etc., which could have a ground potential.
Ensure that your body is isolated by using dry clothes, rubber shoes, rubber
mats or other approved insulation materials.
•
Never allow the appliance to be plugged into an outlet without holding it,
otherwise it may be damaged.
•
If the battery symbol appears in the display, replace the battery immediately.
•
Never use the device with the rear cover removed or with the battery and
fuse compartment open!
•
Do not use the device outdoors, in humid surroundings or in environments
that are subjected to extreme temperature fluctuations.
•
Never use the device in an explosionprone environment.
•
Do not store the device in places which are exposed to direct sunlight.
•
Remove the battery if the device is not used for a long time.
•
If changes or modifications are made to the device, the operational safety is
no longer guaranteed and the warranty becomes void.
1
IIEnglishII