Guarantee and Spare Parts ............. 7 1. Introduction Thank you for purchasing PANCONTROL. For over 20 years the PANCONTROL brand is synonymous with practical, economical and professional measuring instruments. We hope you enjoy using your new product and we are convinced that it will serve you well for many years to come.
2. Scope of delivery After unpacking please check the package contents for transport damage and completeness. • Measurement device • Battery(s) • Manual 3. Safety Instructions To ensure the safe use of the device, please follow all the safety and operating instructions given in this manual.
4. Symbols Description Conforms to the relevant European Union directive (EN-61010) Risk of Danger. Important information See instruction manual Attention! Hazardous voltage. Risk of electric shock. Product is protected by double insulation This product should not be disposed along with normal domestic waste at the end of its service life but should be handed over at a collection point for recycling electrical and electronic devices.
6. General Specifications Display LED + beep Range 200 to 600 V (50/60 Hz) Operating -10º C to 30º C / < 95% Relative Humidity (%RH) temperatute 30º C to 40º C / < 75% Relative Humidity (%RH) 40º C to 50º C / < 45% Relative Humidity (%RH) 3V (2 x 1,5 V AAA) Power supply Pollution degree...
7. Operating Instructions Note: Before each measurement check the correct funktion at a known power source. 1. Place the probe tip close to the circuit to be tested. 2. If the LED in the probe illuminates the measured object is under AC voltage.
9. Guarantee and Spare Parts PANCONTROL instruments are subject to strict quality control. However, should the instrument function improperly during daily use, your are protected by a 24 months warranty from the date of purchase (valid only with invoice). Only trained technicians may carry out repairs to this device. In case of...