Related Manuals for activeshop EXO MILLER SX5
Summary of Contents for activeshop EXO MILLER SX5
- Page 1 INSTRUCTIONS EXO MILLER MODEL SX5(DR-2028) AND SX7(DR-2034) Importer: ACTIVESHOP Ltd. 8b Graniczna St., building DC2A 54-610 Wroclaw, Poland www.activeshop.com.pl Rev. A/05/2024...
- Page 2 Technical data Rated voltage 100-240V Rated frequency 50/60 Hz Electrical power Turnover Up to 35,000 rpm Package contents: - Milling machine base - Head - Power supply - Ceramic cutter Note 1. The mechanism that opens the jaws, may put more resistance when the cutter is not in the chuck. This is normal and is due to the design of the head.
-
Page 3: Security Measures
2. Do not disassemble the device or attempt to use it for purposes other than those indicated in this manual. Any service and repair work must be performed only by an authorized service technician (ACTIVESHOP L t d .). 3. Do not install or operate the device near liquids, wet areas or with wet hands... -
Page 4: Disposal Of The Device
At the end of their useful life, as well as old devices contain full-value recyclable components, so they should be handed over for recycling. Therefore, they should be handed over to appropriate collection points, as well as they can also be handed over to ACTIVESHOP Ltd. STORAGE AND TRANSPORT The device should be transported at a temperature in the range of (-) 20 °C to (+) 50 °C only in its...
Need help?
Do you have a question about the EXO MILLER SX5 and is the answer not in the manual?
Questions and answers