Summary of Contents for activeshop Marathon Escort III
Page 1
Instructions for use Marathon Escort III milling machine Importer: ACTIVESHOP Ltd. 8b Graniczna St., building DC2A 54-610 Wroclaw, Poland www.activeshop.com.pl Rev. A/04/2024...
Page 2
Marathon Escort III professional milling machine, is characterized by high quality workmanship, small dimensions and modern design. Clear and easy-to-read control panel, intuitive operation, create an excellent opportunity for both experienced and novice users to work. The device is equipped with a very powerful head generating a t o r q u e o f 2.9 NCm, so that already at 3000 revolutions it achieves...
Replace the test rod with a suitable cutter. To close the jaws of the milling machine, analogous to subsection 'b', turn the ring counterclockwise until you hear a "click" and the indicator is over the closed padlock. After changing the cutter, make sure that the jaws of the cutter head are definitely closed. Connect the plug to the contact, then turn on the milling machine (No.
- replace the head cable (available at Activeshop). Check if the power cord is not damaged - contact Activeshop service - check if the voltage change button (No. 12 in the diagram) is set to 220V. If it is not, and the router is plugged in, the router is damaged - contact Activeshop service for repair against payment.
At the end of their useful life, as well as old devices contain full-value recyclable components, so they should be handed over for recycling. Therefore, they should be handed over to appropriate collection points, as well as they can also be handed over to ACTIVESHOP Ltd. STORAGE AND TRANSPORT The device should be transported at a temperature in the range of (-) 20°C to (+) 40°C only in its...
Need help?
Do you have a question about the Marathon Escort III and is the answer not in the manual?
Questions and answers