Summary of Contents for activeshop Saeyang K35 Cube
Page 1
Instructions for use Saeyang K35 Cube Milling Machine Importer: ACTIVESHOP SP. Z O.O. 8b Graniczna St., building. DC2A 54-610 Wrocław, Poland www.activeshop.com.pl Rev. A/04/2024...
Page 2
BEFORE TURNING ON THE DEVICE TO THE MAINS, CHECK THAT THE VOLTAGE SWITCH IS SET TO 220V, TURNING ON THE DEVICE TO 110V WILL BURN IT OUT. Professional milling machine K35 CUBE, is characterized by high quality workmanship, small dimensions and modern design.
Page 3
The head should be cleaned and protected from dust. Due to poor use and damage to the head due to dust, complaints will not be accepted. Technical data: Power supply 110-240V/50/50Hz • Ergonomic housing • • Right/left-hand rotation RPM control switch at the base •...
2. Do not disassemble the device or attempt to use it for purposes other than those indicated in this manual. Any service and repair work must be performed only by an authorized service technician (ACTIVESHOP L t d .). 3. Do not install or operate the device near liquids, wet places or with wet hands - so that no liquids get into the device.
Need help?
Do you have a question about the Saeyang K35 Cube and is the answer not in the manual?
Questions and answers