The 25W mobile cordless milling machine is an ideal solution for those who work on the move, but also not only. The milling machine is successfully used in stationary offices. It is characterized by quiet operation even at full speed of 30000 rpm. The milling machine has a built-in 2600 mAh lithium-ion battery, allowing it to work without a connected power supply.
CUTTER INSTALLATION: 1. Make sure the milling machine is not plugged in. 2. Connect the head to the selected milling machine. 3. To replace the cutter, make sure the head is not running. 4. Then turn the clamp to the left until you hear the characteristic "click"...
(unlocked) and the milling machine must be turned off during this time. BASIC PROBLEMS AND SOLUTIONS: The milling machine does not turn on. check the head cable for damage - replace the head cable (available at Activeshop) The head is overheating. check that Twist-Lock is properly closed NOTE!!! Do not soak the heads.
4. Immediately remove the plug from the outlet and contact the authorized service provided by ACTIVESHOP Ltd. in the following cases: a) liquid has entered the device, b) the device emits a strange smell, smoke or makes strange sounds, c) the power cord has been damaged, d) the device has been knocked over or its housing has been damaged.
Need help?
Do you have a question about the SAEYANG MARATHON MINI CRO and is the answer not in the manual?
Questions and answers