Related Manuals for activeshop SAEYANG K35 CRAFIEN
Summary of Contents for activeshop SAEYANG K35 CRAFIEN
- Page 1 Instructions for use SAEYANG K35 CRAFIEN MILLING MACHINE Importer: ACTIVESHOP Ltd. 8b Graniczna St., building DC2A 54-610 Wroclaw, Poland www.activeshop.com.pl Rev. A/04/2024...
- Page 2 Before using the device, carefully read the contents of the accompanying instructions. Introduction • Install the device in a workplace where it will not be too humid, dirty (-2040 C, 0-90% humidity). • Remember not to drop the router, this will cause damage t o the ball bearings, which will affect the life of the motor.
- Page 3 Installation and operation • The plug of the motor cable must be well connected to the body of the device • The plug of the foot control switch cable must be well connected to the body of the device • The appliance's plug must be connected to the outlet only after ensuring that all wires have been installed correctly and safely.
-
Page 4: Troubleshooting
3. Do not install or operate the device near liquids, wet places or with wet hands - so that no liquids get into the device. 4. Immediately remove the plug from the outlet and contact the authorized service provided by ACTIVESHOP Ltd. in the following cases: a) liquid has entered the device,... -
Page 5: Disposal Of The Device
Therefore, they should be handed over to the appropriate collection points, as well as they can also be handed over to ACTIVESHOP Ltd. STORAGE AND TRANSPORT The device should be transported at a temperature in the range of (-) 20°C to (+) 40°C only in its original packaging.
Need help?
Do you have a question about the SAEYANG K35 CRAFIEN and is the answer not in the manual?
Questions and answers