Subscribe to Our Youtube Channel
Related Manuals for activeshop MARATHON ESCORT II PRO
Summary of Contents for activeshop MARATHON ESCORT II PRO
- Page 1 Instructions for use MARATHON ESCORT II PRO MILLING MACHINE Importer: ACTIVESHOP Ltd. 8b Graniczna St., building DC2A 54-610 Wroclaw, Poland www.activeshop.com.pl Rev. A/04/2024...
- Page 2 Introduction • Install the device in a work area where it will not be too humid, or burddy. • Remember never to drop the milling machine or head. This can cause irreparable, and invisible to the naked eye, damage to the milling machine. •...
-
Page 3: Troubleshooting
• Make sure that the cutter you want to use was not bent, asymmetrical, or damaged. Always use standard cutters. Safety Protection System. Overload/overheat function • In order to protect the device from overheating, caused, for example, b y t h e failure of ball bearings, the diameter of the cutter, etc., at the time of overheating, a temperature sensor is activated which will turn off the power supply to the device. -
Page 4: Security Measures
4. Immediately remove the plug from the outlet and contact the authorized service provided by ACTIVESHOP Ltd. in the following cases: a) liquid has entered the device, b) the device emits a strange odor, smoke or makes strange sounds, (c) the power cord was damaged, (d) the device was knocked over or its housing was damaged. -
Page 5: Storage And Transport
Therefore, they should be handed over to appropriate collection points, as well as they can also be handed over to ACTIVESHOP Ltd. STORAGE AND TRANSPORT The device should be transported at a temperature in the range of (-) 20 °C to (+) 50 °C only in its...
Need help?
Do you have a question about the MARATHON ESCORT II PRO and is the answer not in the manual?
Questions and answers