Installing An Eisa Or Graphics Board - HP Visualize J280 Owner's Manual

Installing an
EISA or
Graphics Board
Your workstation's EISA Assembly has five slots. Four are EISA
slots; of these, two are EISA-only and two are EISA/GSC slots. The
bottom slot is GSC only.
The graphics boards supported by your workstation provide:
HP VISUALIZE EG- Fast 2D graphics
HP VISUALIZE-8/HCRX-24 Accelerated 8-plane or
24-plane graphics
HP VISUALIZE-48 24/24 Image plane, 24–bit Z buffer,3D
graphics
NOTICE: Dual graphics boards take up two slots.
Figures B–31 and B–32 show the physical layout of the EISA/GSC
slots, first from outside the system unit, then from inside the EISA
Assembly.
Figure B–31. EISA/GSC Slots from Outside the EISA Assembly
B-51