HP Visualize J280 Owner's Manual page 91

5-4
Table 5–2. Problems Loading and Booting the Operating System
Problem Solution
The power LED is Make sure that all SCSI devices are set
lit, and text appears to the proper SCSI ID. (See Appendix
on the screen, but C for default SCSI ID settings.)
more than two min-
utes have passed Check that all SCSI devices are cor-
with no sign of rectly cabled. Check that the SCSI bus
system activity. is correctly terminated. (See Appendix
C for information on SCSI cabling and
termination.)
The system stops or Follow the instructions in "Dealing
hangs while booting. With a Boot Failure," later in this
chapter.
If problems persist, contact your system administrator or call
your designated service representative.