HP Visualize J280 Owner's Manual page 222

Memory Information Sample 2
The following sample shows the memory information when memory
modules are not properly installed and configured. In this sample the
memory module in memory slot 1A is missing.
MEMORY INFORMATION
WARNING: Memory has been reconfigured due to a
physical change or because the
Page Deallocation Table (PDT) was cleared.
This is for information only. No action is re-
quired.
MEMORY STATUS TABLE
Slot Size(a+b)
–––– –––––––––
0a/b 64MB
1a/b ??MB
2a/b 128MB
–––––––––
TOTAL 192MB
DETAILED MEMORY CONFIGURATION TABLE
SPA GROUP SMC SMC Status Bank Bank Status Size Slot
––– ––––– ––– –––––––––– –––– ––––––––––
0x00000000 0
Group 0 interleaved
BAD MEMORY TABLE
Status
––––––
Configured
SIMM not seated properly.
Configured
0 Configured 1 Configured 64MB
0 Configured 3 Configured 64MB
1 Configured 1 Configured 64MB
2 ways over 3 banks
–––– ––––
2a/b
0a/b
2a/b
D-27