Computer Setup-Exit; Hp Pro 3015 - Computer Setup (F10) Utility; Computer Setup (F10) Utilities - HP Pro 3005 MT Maintenance And Service Manual

Table 3-6 Computer Setup—PC Health (continued)
Option
Current CPU Fan
Speed
Current System Fan
Speed
Computer Setup—Exit
Table 3-7
Option
Save Changes and Exit
Discard Changes and
Exit
Load Optimal Defaults
HP Pro 3015 – Computer Setup (F10) Utility

Computer Setup (F10) Utilities

Use Computer Setup (F10) Utility to do the following:
●
Change factory default settings.
●
Set the system date and time.
●
Set, view, change, or verify the system configuration, including settings for processor, graphics,
memory, audio, storage, communications, and input devices.
●
Modify the boot order of bootable devices such as hard drives, diskette drives, optical drives, or
USB flash media devices.
●
Restrict a device from booting the unit.
●
Run hard drive self-tests.
●
View CPU and system temperatures.
●
Establish a supervisor password that controls access to Computer Setup (F10) Utility and the
settings described in this section.
●
Secure integrated I/O functionality, including the serial, USB, or parallel ports, audio, or
embedded NIC, so that they cannot be used until they are unsecured.
●
Enable or disable pre-boot messages.
●
Enable or disable USB legacy support.
16 Chapter 3 Computer Setup (F10) Utility
Description
(view only)
(view only)
Computer Setup—Exit
Description
Allows you to save current settings and exit Computer Setup.
Allows you to exit Computer Setup without saving changes.
Allows you to reset Computer Setup to factory defaults.