Computer Setup (F10) Utility; Hp Pro 3005/3085 - Computer Setup (F10) Utility - HP Pro 3005 MT Maintenance And Service Manual

3

Computer Setup (F10) Utility

The computer setup utility differs for the HP Pro 3005/3085 and the HP Pro 3015.
HP Pro 3005/3085 – Computer Setup (F10) Utility
Use Computer Setup (F10) Utility to do the following:
●
Change factory default settings.
●
Set the system date and time.
●
Set, view, change, or verify the system configuration, including settings for processor, graphics,
memory, audio, storage, communications, and input devices.
●
Modify the boot order of bootable devices such as hard drives, diskette drives, optical drives, or
USB flash media devices.
●
Restrict a device from booting the unit.
●
Run hard drive self-tests.
●
View CPU and system temperatures.
●
Establish a supervisor password that controls access to Computer Setup (F10) Utility and the
settings described in this section.
●
Secure integrated I/O functionality, including the serial, USB, or parallel ports, audio, or
embedded NIC, so that they cannot be used until they are unsecured.
●
Enable or disable pre-boot messages.
●
Enable or disable USB legacy support.
HP Pro 3005/3085 – Computer Setup (F10) Utility 9