Surge Protection; Specifications - Projecta INTELLI-START IS3000 Manual

BATTERY AND JUMP START STATUS INDICATION
• The IS3000 and IS5000 jump starters utilise a coloured LCD display and backlit
buttons to inform the user about its status and to support the operation of the
jump starter.

SURGE PROTECTION

• The IS3000 and IS5000 feature built in surge protection so you can safely jump start
vehicles with EFI (electronic fuel injection) and computer management systems.

SPECIFICATIONS

P/No.
Battery
Battery Capacity
Battery Chemistry
Peak Amps
Clamp Power
Battery Cycles
Jump starter Leads
Length
Cable
Polarity Protection
Overload Protection
Recharging
Via
Source
Main Charge
Maintenance Charge
Jump start Connection Voltages
Vehicle Voltage Range
Dimensions, Weight & Environmental
Height
Length
Width
Weight
Operating Temperature
Operating Temperature
(charging)
Storage Temperature
(long term)
Ingress Protection
1. Tested on a Ford Ranger 3.2L Diesel and Ford Territory 4.0L Petrol with a flat battery in good condition
IS3000
2 x 6.0Ah, at 12.8V DC,
48,000mAh at 3.2V DC (153.6Wh)
Lithium Iron Phosphate (LiFePO
3000A
12V DC Vehicle: 1000A,
24V DC Vehicle: 850A
1500mm Positive & Negative
50mm
2
MCU controlled with mechanical solenoids
MCU controlled with mechanical solenoids
Internally cell-balanced constant current/constant voltage
Resumes charging if battery voltage drops to 13.2V DC
2 – 14.6V DC (12V DC Vehicle), 14.7 – 30V DC (24V DC Vehicle)
10.6kg
IP65 (Rain Proof) with covers over the ports
2 x 12.0Ah, at 12.8V DC,
96,000mAh at 3.2V DC (307.2Wh)
12V DC Vehicle: 1500A,
24V DC Vehicle: 1000A
2000
1500mm Positive & Negative
Charger docking station
AC charger 15V DC 1A
326mm
366mm
170mm
-20˚C to 60˚C
0˚C to 45˚C
-10˚C to 45˚C
IS5000
)
4
4500A
75mm
2
13.5kg
5