Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Cadel RIVER IDRO 16T2
Summary of Contents for Cadel RIVER IDRO 16T2
- Page 1 USER MANUAL PELLET THERMOSTOVE Original Instructions | ©2022 CADEL srl | All rights reserved - Tutti i diritti riservati IDROPRINCE 12 - RIVER IDRO 16T2 - 23T2 - 23H O T2 MIRA 16T2 - 22T2 TESIS 16 AIRTIGHT T2 - 23 AIRTIGHT T2...
-
Page 2: Table Of Contents
10.3 CONTACT THERMOSTAT IN THE FUEL HOPPER..22 SUMMARY 10.4 ELECTRICAL SAFETY ..........23 1 MANUAL SIMBOLOGY ........4 10.5 SMOKE FAN ............23 2 DEAR CUSTOMER ..........4 10.6 GEAR MOTOR ............23 2.1 REVISIONS TO THE PUBLICATION ......5 10.7 TEMPORARY POWER CUT ........23 2.2 CARE OF THE MANUAL AND HOW TO CONSULT IT ...5 10.8 FAILED START-UP ..........23 SAFETY REQUIREMENTS ......6 10.9 BLACKOUT WITH THE BOILER ON ......23... -
Page 3: Manual Simbology
MANUAL SIMBOLOGY USER AUTHORISED TECHNICIAN (ONLY to interpret or the Stove-manufacturer or the Authorized Technician of Technical Assistance Service approved by the Stove-manufacturer) SPECIALIZED STOVE-REPAIRER CAUTION: READ CAREFULLY THE NOTE CAUTION: DANGER OR IRREVERSIBLE DAMAGE POSSIBILITY • The icons with the stylized figures indicates whom the subject dealt in the paragraph is addressed to (between the User and/ or the Authorized Technician and/or the Specialized Stove-repairer). -
Page 4: Revisions To The Publication
Hereby CADEL S.r.l. declares that the radio equipment type Easy Connect Plus + Navel Stand Alone is in compliance with Directive 2014/53/EU. According to (EU) No. 305/2011 regulation, the " Declaration of Performance" and "Declaration of Conformity" are available online, in the download area, at the web sites: - www.cadelsrl.com... -
Page 5: Safety Requirements
SAFETY REQUIREMENTS • Installation, electrical connection, functional verification and maintenance must only be performed by qualified or authorised personnel. • Live electrical parts: disconnect the product from the 230V power supply before perfor- ming any maintenance operation. Only power the product after completing assembly. •... -
Page 6: Cautions - Warranty Conditions
experience and knowledge must be kept away from packaging. The stove IS NOT a toy. • Childreen must be constantly overseen in order to assure that they do not play with the appliance. • During its running, the stove reaches high temperatures: keep away childreen and animals and for your safety please use appropriate fireproof devices, such as heat-protecting gloves. -
Page 7: Warranty Conditions
WARRANTY CONDITIONS The duration, conditions and limitations of CADEL S.r.l. can be found on the guarantee card enclosed with the device. The company guarantees the product, with the exception of elements subject to normal wear listed below, for a period of 2 (two) years from the date of purchase attested by: •... -
Page 8: Spare Parts
tions and in accordance with the fee in force for the work to be carried out. The user will also be charged for any costs incurred to remedy the incorrect technical interventions, tampering or damage to the appliance, not attributable to original faults. Save for the legal or regulatory limits, the guarantee does not cover the containment of atmospheric and acoustic pollution. -
Page 9: Information For Management Of Electric And
LEGENDA WHERE TO DISPOSE MATERIALS Metal If there is any, to be disposed of separately based on Glass A. OUTER CLADDING the material used: Tiles or ceramics Stone Glass ceramic (fire door): to be disposed of with If there is any, to be disposed of separately based on inert or mixed waste B. -
Page 10: Wifi - Bluetooth Connection
DESCRIPTION CODE MATERIAL SYMBOL DIRECTIONS FOR COLLECTION SORTED waste collection - WOOD BED WOOD WOOD - WOOD CAGE Check with the competent body on FOR 50 - WOOD PALLET how to dispose of this packaging at the recycling depot SORTED waste collection - CARDBOARD BOX PAPER CORRUGATED CARDBOARD... -
Page 11: Use
Fig. 3 - EASY CONNECT PLUS module Fig. 4 - EASY CONNECT PLUS display Fig. 5 - EASY CONNECT PLUS app The documentation for connecting the Wi-Fi and using the App are available online at the following addresses: https://www.cadelsrl.com/donwload-wi-fi/ http://www.free-point.it/it/downloads/ https://www.pegasoheating.com/it/documenti/ INTRODUCTION To have the best performance with the lowest consumption please follow the here descripted instructions. -
Page 12: Control Panel Display
CONTROL PANEL DISPLAY Menu items. Fig. 6 - Display Fig. 7 - Display Fig. 8 - Display LEGEND Fig. 6|Fig. 7|Fig. 8 Boiler lighting/shutdown (ESC) Scrolling of programming menu to decrease Menu Scrolling of programming menu to increase Decrease set temperature/programming functions Increase set temperature/programming functions Display Time... - Page 13 h - Pump on T (default 50°C). i - Auxiliary boiler (default deactivated). j - Pellet recipe. k - Smoke rpm % ventilation. l - Maximum power (1-5 - default 5). m - Components test (displayed only when the boiler is switched off) n - “Chimney sweep”...
- Page 14 actual temperature the stove supplies. Connect the wires from the external thermostat (INSTALLER MANUAL) Once the thermostat is connected, it must be enabled. Do so as follows: • Press the “menu” button. • Scroll to “Settings” using the arrows. • Select by pressing “menu”. •...
- Page 15 • Press “menu” to confirm and “esc” to exit k - Smoke rpm % ventilation To change the parameter act as follows: • Press the “menu” button. • Scroll to “Settings” using the arrows • Press “menu” to confirm. • Scroll to “Smoke rpm variation” using the arrows. •...
-
Page 16: Info Menu
o - System configuration To change the system configuration act as follows: • Press the “menu” button. • Scroll to “Settings” using the arrows • Press “menu” to confirm. • Scroll to “System configuration” using the arrows. • Press “menu” to confirm. •... -
Page 17: Failed Ignition
pre-heating starts. After some seconds the feed screw loads pellets and the resistance pre-heating continues. When the tem- perature is high enough (after about 5-8 minutes), ignition is considered to be completed. • Once the ignition step is complete, the stove moves into operating mode and shows the selected heat output, the ambient temperature and the big flame (see Fig. -
Page 18: Programmed Mode (Timer) - Main Menu
Fig. 11 - Display Note: The full stop to the right of the ambient temperature shown in the control panel display (upper right) indicates the half degree (e.g. 23.° means 23.5°C). Air V. Speed - this function allows selecting the desired speed for the ambient fans from 1 to 5. Water temperature - temperature adjustable from 30°... -
Page 19: Notes For Timer Operation
8.13 NOTES FOR TIMER OPERATION • Start-up with the timer always takes place with the last temperature and ventilation settings (or with default 20°C and V3 settings in the event they have never been changed). • It is possible to set the shutdown time from “ignition time + 10 minutes” up to 23:50. If 24:00 is set as shutdown time, the stove will not switch off (use this shutdown time, for example, when the next day is programmed to continue from 00:00). -
Page 20: Pellets Recipe (See Section J )
8.16 PELLETS RECIPE (SEE SECTION J ) Changes to be made with the support of the authorised technician. This function is for adapting the stove to the pellets that are being used. In fact, as there are several types of pellets on the market, boiler operation is extremely variable depending on the fuel quality. -
Page 21: Pellet Supply
The main quality certifications for pellets currently available on the European market guarantee that the fuel complies with class A1/A2 according to ISO 17225-2. These certifications include, for example, ENPlus, DINplus, Ö-Norm M7135, and specifically assure that the following characteristics are complied with: •... -
Page 22: Electrical Safety
10.4 ELECTRICAL SAFETY The product is protected against sudden current surges by a main fuse in the power supply panel on the rear part of the product. Other fuses that protect the electronic boards are found on the latter. 10.5 SMOKE FAN If the fan stops, the electronic board promptly shuts off the pellets supply and an alarm message is displayed. -
Page 23: Alarm Alerts
TAMPERING WITH THE SAFETY DEVICES IS PROHIBITED If the product is NOT used as described in this instruction manual, the manufacturer declines all liability for any damage caused to persons and property. The manufacturer furthermore refuses to accept responsibility for damage to persons and property arising from the failure to observe all the rules contained in the manual and in particular: •... -
Page 24: Routine Maintenance
If this is the case, the alarm will be shown again, otherwise the stove will switch OFF. If the alarm persists, contact a service centre. ROUTINE MAINTENANCE 11.1 INTRODUCTION For a long working life of the stove, have a periodic cleaning of the stove as described in the following paragrafs. •... -
Page 25: Ash Drawer Cleaning River Idro - Mira - Tesis
Per each pellets supply, check the probable presence of meal, sawdust and other remanins on the hopper bottom. If present, they must be removed with the aid of a vacuum cleaner (see Fig. 17 ). 11.4 ASH DRAWER CLEANING RIVER IDRO - MIRA - TESIS Press door “H”... -
Page 26: Fume Pipes Annual Cleaning
Attention! When cleaning is completed, remember to put part “C”, brazier “B” and ash pan “D” back in place and close all the doors (“G”, “H”, “F”)back up again. 11.6 FUME PIPES ANNUAL CLEANING Clean annually from soot with brushes. The cleaning operation must be executed by a specialized stove-repairer who will provide for the cleaning of fume pipe, chimney flue and chimney pot. -
Page 27: Pipe Unit Cleaning
If this cleaning is not done every 2-3 days, the stove could become clogged with ash after several hours of operation and go into alarm conditions. Fig. 22 - Turbulator cleaning lever (Idro Prince 16-23-23 H2O, Aquos 16-23-23 H2O, Idron 16-22 Airtight, Hidrofire 22.8) 11.13 PIPE UNIT CLEANING For improved boiler performance, once a month it is necessary to clean the pipes inside the combustion chamber. -
Page 28: Checking The Inner Components
Fig. 24 - Shutter with fuses to remove When not in use the appliance must be disconnected from the mains power supply. It is recommended to remove the power cable for additional safety, especially in the presence of children. The service fuse may have to be replaced if the control panel display does not switch on. There is a fusebox on the back of the product, near the power socket. -
Page 29: In Case Of Anomaly
IN CASE OF ANOMALY 12.1 PROBLEM SOLVING Before of every Authorized Technician intervention, the same Technician has the duty to check if the parame- ters of the mother board correspond to those of the table you own. In case of doubts regarding the use of the stove, please contact ALWAYS the Authorized Technician on order to avoi irreparable damages! PROBLEM CAUSE... - Page 30 PROBLEM CAUSE SOLUTION INTERVENTION Empty hopper Full the hopper. Auger blocked by a foreign object (for Clean the auger. example nails) Bad quality pellets Try other types of pellets. Pellet drop value too Adjust the pellet loading. low "phase 1" The fire extinguish and the stove stops Check if on the...
-
Page 31: Problem Solving (Thermostove)
PROBLEM CAUSE SOLUTION INTERVENTION The stove is at its Ambient temperatu- The stove is at its minimum value. Increase the desired ambient highest power but re reached. temperature. does not heat up. Stove running and display showing Reached fume outlet The stove runs at minimum. - Page 32 PROBLEM POSSIBLE CAUSES SOLUTIONS INTERVENTION Improper combu- Check recipe and parameters. stion adjustment. Dirty boiler/system Check and clean the boiler. Temperature does not increase with the boiler working Insufficient boiler Make sure the boiler is appropriately proportional to the system power.
- Page 33 Issue date: 18.11.2021 CADEL SRL - Via Foresto Sud, 7 - 31025 Santa Lucia di Piave (TV) - ITALY - Tel. +39 0438 738669 - Fax +39 0438 73343 - customercare@cadelsrl.com - www.cadelsrl.com Iscr. registro imprese / Partiva Iva IT 03202180265 - R.E.A. TV 227665 - Capitale Sociale i.v. € 30.000,00...
-
Page 34: Technical Documentation For Local Space Heaters According To Commission Regulations (Eu) 2015/1185 - (Eu) 2015/1186 (Product Fiche)
TECHNICAL DOCUMENTATION FOR LOCAL SPACE HEATERS ACCORDING TO COM- MISSION REGULATIONS (EU) 2015/1185 - (EU) 2015/1186 (PRODUCT FICHE) CADEL srl - Via Foresto Sud 7 - 31025 Santa Lucia di Piave (TV) - Italy Manufacturer CADEL: RIVER IDRO 16 T2 - MAYA IDRO 16 T2... - Page 35 TECHNICAL DOCUMENTATION FOR LOCAL SPACE HEATERS ACCORDING TO COM- MISSION REGULATIONS (EU) 2015/1185 - (EU) 2015/1186 (PRODUCT FICHE) CADEL srl - Via Foresto Sud 7 - 31025 Santa Lucia di Piave (TV) - Italy Manufacturer CADEL: RIVER IDRO 23 T2 - RIVER IDRO 23 H2O T2 - MAYA IDRO 24 T2...
- Page 36 TECHNICAL DOCUMENTATION FOR LOCAL SPACE HEATERS ACCORDING TO COM- MISSION REGULATIONS (EU) 2015/1185 - (EU) 2015/1186 (PRODUCT FICHE) CADEL srl - Via Foresto Sud 7 - 31025 Santa Lucia di Piave (TV) - Italy Manufacturer CADEL: Trademak: model identifier FREEPOINT:...
- Page 37 NOTE...
- Page 38 NOTE...
- Page 39 NOTE...
- Page 40 Rev. 00 - 2023 CADEL srl www.cadelsrl.com 31025 S. Lucia di Piave - TV www.free-point.it Via Martiri della Libertà, 74 - Italy www.pegasoheating.com Tel. +39 0438 1520200...
Need help?
Do you have a question about the RIVER IDRO 16T2 and is the answer not in the manual?
Questions and answers