Page 2
Front view Analog audio In & Out (DSub 9 pin female) Pin Description Left Out+ [Hot] Left Out- [Cold] Ground [G] Right In+ [Hot] Right In- [Cold] Reset button Right Out+ [Hot] A brief press of the button will reset the device. Right Out- [Cold] Holding the reset button pressed in for Left In+ [Hot]...
Page 3
5 minutes). otherwise leave them at default (“0.0.0.0”). ii) If you did not connect audio, launch the “Barix Discovery Tool” and click the “Get” button to find Hit the “Apply” button to save all changes. The device out which IP address the device has obtained (see will reboot with the configured IP address.
Page 4
-s 192.168.0.6 00:08:E1:00:B1:77 and hit the “Enter” key (replace the digits according to the user forum please visit www.barix.com. your devices MAC address).You must have administra- tive rights to be able to do so (sudo on OSX / Linux).
Need help?
Do you have a question about the Exstreamer 500 and is the answer not in the manual?
Questions and answers