Page 2
WWW.GOPOWERBIKE.COM DO NOT RETURN TO STORE! If you need any help with your new GoHype bike, whether it is missing parts or you need help with assembly, please email us at help@gopowerbike.com. We will be sure to respond!
Page 3
Welcome Thank you for purchasing the GoHype from GoPowerBike. We take pride in bringing you a quality product that will offer years of enjoyment. Please read and understand this manual fully before assembling and riding your bike. If you have any questions after reading this manual, please reference the GoPowerBike Help Center or contact us by email.
Table of Contents Using This Manual General Info Safety Check Getting Started Folding/Unfolding the Handlebars Installing the Pedals Installing the Seat Folding Your Ebike Get To Know Your Ebike Charging Your Ebike Battery and Charging Riding Your Ebike Maintenance Disclaimer & General Warnings Limited Warranty Additional Warranty Terms...
Assembly and first adjustment of your bike from GoPowerbike requires special tools and skills and it is recommended that this should be done by a certified, reputable bike mechanic if possible.
GoPowerbike recommends having a certified, reputable bike mechanic check your work. NOTICE: If you do not have the experience, skill, and tools to complete assembly and fit, GoPowerbike highly recommends having a certified, reputable bike mechanic complete these procedures as well as any future adjustments or tuning.
If the throttle, brake lever cutoff switches, pedal assistance, or lighting are functioning abnormally, intermittently, or not working, please discontinue using your ebike immediately and contact the GoPowerbike Product Support team for assistance. Quick Release Levers Quick release levers are located on your ebike to secure the seat post. These provide convenience to the user since they allow the seat post to be adjusted without tools.
Page 8
Loose, worn, or damaged handlebar grips should be replaced before you ride and can be purchased from GoPowerbike. The seat and seat post should be properly aligned, fitted to the user, and the seat post quick release should be properly tightened, fully closed, and secured before riding.
The “right side” of the bike, for example, is the side where the rider’s right hand and foot will be. · If anything is missing or damaged, please contact GoPowerbike within 15 days of receipt. help@gopowerbike.com When contacting GoPowerBike, please indicate which bike model you have and be prepared to forward a copy of your receipt.
Folding/Unfolding the Handlebars To Fold Step 1: Locate the red lever on the Red Lever side of the latch and pull up. Step 2: While holding the lever, open the latch on the stem and fold the stem down. To Unfold Step 1: Pull the handlebar stem upright Step 2: Close the latch on the side of the stem.
Installing the Pedals Step 1: Align the spindle on “R" pedal with the hole at the end of the crank arm on the right side of the bike. Step 2: Hold the pedal base steady and, taking care that the spindle enters the hole straight on, use your other Crank Arm hand to twist the spindle clockwise into...
Page 13
Step 3: Finish inserting and then tightening the spindle into the crank arm by turning it clockwise Step 4: Check that the right pedal is secure. Step 5: Repeat steps 2 – 5 with the left (“L") pedal. NOTICE - the spindle on the left pedal is reverse threaded and needs to be inserted and tightened with counterclockwise turns.
Installing the Seat Step 1: Loosen the seat post clamp Step 2: Insert the seat post into the seat tube Step 3: Raise or lower the seat post in the seat tube to the proper height for the rider Step 4: Check that the seat is straight Step 5: Retighten the seat post clamp NOTICE! Always insert the seat...
Folding Your Ebike Latch Lock-closed Latch-closed To Unfold Step 1: Unfold the rear wheel and use the kickstand to keep the bike upright Step 2: Hold the latch lock up and push the latch closed Step 3: Make sure the hook end of the latch is secure and let the latch lock turn down into the latch to lock everything in place Latch Lock-open...
Get to Know Your Ebike Power On/Off: Press the power button to turn on the bike, the display will light up; repeat to turn off. Headlight: Toggle the Headlight switch to turn the light on/off. Pedal Assist: Toggle between the three positions on the Pedal Assist button to switch between pedal assist levels.
Charging Your Ebike Step 1: Make sure the bike is off and avoid rain and direct sunlight Step 2: Connect the charger to the bike’s charging port before plugging the charger into the wall outlet. Step 3: The charger light will be red while charging and turn green when charging is complete.
Battery and Charging • Do not connect the positive to negative, or vice versa. Do Not damage, disassemble, or short-circuit the battery. Avoid water, other liquid, or other foreign matter inside the battery to prevent a short circuit. • Instructions in this manual must be followed when charging the battery, otherwise the owner shall take sole responsibility for any consequences.
Riding your ebike 1. Do not use the eBike before reading this manual carefully and knowing your eBike thoroughly. 2. Do not lend your eBike to anyone who do not know how to use it, so as to avoid harm. 3.
Maintenance 1. The front and rear wheels should be aligned to the center of the front fork and frame. 2. Park away from direct sunlight and rain. 3. Do not rinse the ebike. Wipe with a damp cloth to clean. 4.
6. For more information, please visit our official website: www.gopowerbike.com General Warnings Like any sport, bicycling involves risk of damage, injury, and death. By choosing to ride a bike, you assume the responsibility for that risk, so you need to know, and practice the rules of safe and responsible riding and the proper use and maintenance of this bike.
Limited Warranty Warranty Info Every bike by GoPowerBike is covered under a manufacturer’s one-year limited warranty for the original owner against all manufacturing defects. GoPowerBike warrants this product, including all individual components against defects in material or workmanship as follows:...
GoPowerBike will not be liable and/or responsible for any damage, failure, or loss caused by any unauthorized service or use of unauthorized parts. In no event shall GoPowerBike be responsible for any...
Page 24
We are here to help! If you have questions: Contact us directly by email to help@gopowerbike.com...
Need help?
Do you have a question about the GoHype and is the answer not in the manual?
Questions and answers