Page 2
WWW.GOPOWERBIKE.COM DO NOT RETURN TO STORE! If you need any help with your new GoFlow bike, whether it is missing parts or you need help with assembly, please email us at help@gopowerbike.com. We will be sure to respond!
Page 3
Welcome Thank you for purchasing the GoFlow from GoPowerBike. We take pride in bringing you a quality product that will offer years of enjoyment. Please read and understand this manual fully before assembling and riding your bike. If you have any questions after reading this manual, please reference the GoPowerBike Help Center or contact us by email.
Table of Contents Using This Manual General Info Safety Check Getting Started Assembling the Handlebar Adjusting the Handlebar Installing the Basket Installing the Seat Get To Know Your Ebike Battery and Charging Riding Your Ebike Maintenance Disclaimer & General Warnings Limited Warranty Additional Warranty Terms...
Assembly and first adjustment of your bike from GoPowerbike requires special tools and skills and it is recommended that this should be done by a certified, reputable bike mechanic if possible.
GoPowerbike recommends having a certified, reputable bike mechanic check your work. NOTICE: If you do not have the experience, skill, and tools to complete assembly and fit, GoPowerbike highly recommends having a certified, reputable bike mechanic complete these procedures as well as any future adjustments or tuning.
If the throttle, brake lever cutoff switches, pedal assistance, or lighting are functioning abnormally, intermittently, or not working, please discontinue using your ebike immediately and contact the GoPowerbike Product Support team for assistance. Quick Release Levers Quick release levers are located on your ebike to secure the seat post. These provide convenience to the user since they allow the seat post to be adjusted without tools.
Page 8
Loose, worn, or damaged handlebar grips should be replaced before you ride and can be purchased from GoPowerbike. The seat and seat post should be properly aligned, fitted to the user, and the seat post quick release should be properly tightened, fully closed, and secured before riding.
The “right side” of the bike, for example, is the side where the rider’s right hand and foot will be. · If anything is missing or damaged, please contact GoPowerbike within 15 days of receipt. help@gopowerbike.com When contacting GoPowerBike, please indicate which bike model you have and be prepared to forward a copy of your receipt.
Assembling the Handlebar Step 1: Pull the stem upright ❶ Step 2: Fold the latch up to close it . It will snap into place. Step 3: Unscrew the clamp at the top of the stem and place the handlebar into ❷...
Adjusting the Handlebar Step 1: Unfold the lever Step 2: Rotate and adjust the direction of the handlebars to a comfortable position Step 3: Close the lever to secure the handlebars in place lever...
Installing the Basket Step 1: Retrieve the four (4) screws and washers received with the bike. Step 2: Use the screws to attach the rear basket by screwing the basket to the frame of the bike behind the seat.
Installing the Seat Step 1: Loosen the seat post clamp by opening the lever Step 2: Insert the seat post into the seat tube. Step 3: Be sure to insert the seat post past the max height level indicator. NOTICE! Always insert the seat post past the minimum insertion point marked on the seat post.
Getting to Know your Ebike Power On/Off: Insert and turn the Keys key clockwise to turn on your ebike Lights On/Off: Press and hold the red button on the left handlebar Horn: Press the green button on the left handlebar Lights LCD Display: The LCD shows your speed and battery level...
Battery and Charging • Do not connect the positive to negative, or vice versa. Do Not damage, disassemble, or short-circuit the battery. Avoid water, other liquid, or other foreign matter inside the battery to prevent a short circuit. • Instructions in this manual must be followed when charging the battery, otherwise the owner shall take sole responsibility for any consequences.
Riding your ebike 1. Do not use the eBike before reading this manual carefully and knowing your eBike thoroughly. 2. Do not lend your eBike to anyone who do not know how to use it, so as to avoid harm. 3.
Maintenance 1. The front and rear wheels should be aligned to the center of the front fork and frame. 2. Park away from direct sunlight and rain. 3. Do not rinse the ebike. Wipe with a damp cloth to clean. 4.
6. For more information, please visit our official website: www.gopowerbike.com General Warnings Like any sport, bicycling involves risk of damage, injury, and death. By choosing to ride a bike, you assume the responsibility for that risk, so you need to know, and practice the rules of safe and responsible riding and the proper use and maintenance of this bike.
Limited Warranty Warranty Info Every bike by GoPowerBike is covered under a manufacturer’s one-year limited warranty for the original owner against all manufacturing defects. GoPowerBike warrants this product, including all individual components against defects in material or workmanship as follows:...
GoPowerBike will not be liable and/or responsible for any damage, failure, or loss caused by any unauthorized service or use of unauthorized parts. In no event shall GoPowerBike be responsible for any...
Page 22
We are here to help! If you have questions: Contact us directly by email to help@gopowerbike.com...
Need help?
Do you have a question about the GoFlow and is the answer not in the manual?
Questions and answers