Advertisement
Advertisement
Table of Contents
Related Manuals for Ronix 8657
Summary of Contents for Ronix 8657
- Page 1 BRUSHLESS ANGLE GRINDER KIT 20V 8657...
-
Page 2: Technical Specifications
TECHNICAL SPECIFICATIONS 8657 Model Power Source Battery 20V/4000mAh Battery Chemstry Lithium Battery No Load RPM 8500RPM Disc Diameter 125mm Material Aluminium,Steel and Nylon Continues Working 45min Weight 4.16Kg 1pc Side Handle 1pc Protect Guard Include 1pc Spanner 2pcs Battery 1pc Charger... -
Page 3: General Power Tool Safety Warnings
GENERAL POWER TOOL SAFETY WARNINGS WARNING! - Read all safety warnings and all instructions. Failure to follow the warnings and instructions may result in electric shock, fire and or serious injury. - Save all warnings and instructions for future reference. WORK AREA SAFETY - Keep work area clean and well lit. - Page 4 serious personal injury. - Use personal protective equipment. Always wear eye protection. Protective equipment such as dust mask, non-skid safety shoes, hard hat, or hearing protection used for appropriate conditions will reduce personal injuries. - Prevent unintentional starting. Ensure the switch is in the offposition before connecting to power source and/or battery pack, picking up or carrying the tool.
- Page 5 parts, breakage of parts and any other condition that may affect the power tools operation. If damaged, have the power tool repaired before use. Many accidents are caused by poorly maintained power tools. - Use the power tool, accessories and tool bits etc. in accordance with these instructions, taking into account the working conditions and the work to be performed.
- Page 6 - Be careful not to damage the spindle, the flange (especially installing surface) and the lock nut. Damage to these parts could result in wheel breakage. - NEVER use tool with wood cutting blades or other saw blades. Such blades when used on a grinder frequently kick and cause loss of control leading to personal injury.
- Page 7 Or the toolmay be damaged. - Press the shaft lock to prevent spindle rotation when installing or removing accessories. Shaft Lock ASSEMBLY CAUTION! Always be sure that the tool is switched off and unplugged before carrying out any work on the tool. INSTALLING SIDE GRIP (HANDLE) CAUTION! - Always be sure that the side grip is installed securely before operation.
- Page 8 INSTALLING OR REMOVING WHEEL GUARD CAUTION! - When using a depressed center grinding wheel/Multi-disc, flex wheel, wire wheel brush, cut off wheel or diamond wheel, the wheel guard must be fitted on the tool so that the closed side of the guard always points toward the operator.
- Page 9 WARNING! - It should never be necessary to force the tool. The weight of the tool applies adequate pressure. Forcing and excessive pressure could cause dangerous wheel breakage. - ALWAYS replace wheel if tool is dropped while grinding. - NEVER bang or hit grinding disc or wheel onto work. - Avoid bouncing and snagging the wheel, especially when working corners,sharp edges etc.
-
Page 10: Maintenance
with a new wheel, do not work the grinder in the B direction or it will cut into the work piece. Once the edge of the wheel has been rounded off by use, the wheel may be worked in both A and B direction. work piece. Once the edge of the wheel has been rounded off by use, the wheel may be worked in both A and B direction.
Need help?
Do you have a question about the 8657 and is the answer not in the manual?
Questions and answers