Enabling Usb Legacy Support - Compaq Evo N200 Hardware Manual

External Device Connections

Enabling USB Legacy Support

Use the Setup utility to enable USB legacy support.
1. To access the Setup utility, turn on or restart the computer,
then press
F10 message is displayed in the lower left corner of the
screen.
2. Select Advanced from the menu bar. (To select a menu, press
shift +
3. In the Legacy USB Support field, select Enabled. (To toggle
this field from Enabled to Disabled, press the
4. To save your preference and exit the Setup utility, press the
esc
Changes, then follow the instructions on the screen.
7–6
while the To Change System Settings, Press
F10
the or
home
key (or select Exit from the menu bar), select Exit Saving
arrow key.)
end
key.)
–
Hardware Guide