Turning On The Tablet Pc - Compaq tc1000 Getting Started Manual

Setting Up the Tablet PC

Turning On the Tablet PC

To turn on the tablet PC, slide and release the power switch 1 .
When the tablet PC is on:
■
The power/standby light 2 turns on.
■
You are prompted to begin software setup.
Instructions for software setup are provided in "Setting Up the
Software," later in this chapter. Before beginning software setup,
Compaq recommends that you set up the tablet PC pen so you can
use the pen during software setup. Instructions for setting up and
using the pen are provided in "Setting Up the Pen," next in this
chapter.
If the tablet PC does not turn on, see Chapter 3.
Turning on the tablet PC
1–16 Getting Started