Layout; Functional Description - Metasys MULTI SYSTEM TYP 1 ECO Instructions For Use Manual

1
6
2
5
7
4.4.

Layout

Module 1
Central fastening element:
> Air, water and electricity connections
> Wall mount
> Main board
> Diagnostics board (only MST 1 ECO)
MULTI SYSTEM TYP 1 ECO
4.5.

Functional description

Lifting a suction hose opens the place selection valve. The suction current is fed into module 2, where the air/water separation takes place by means of the cyclone
principle.
The dry air leaves the system via the place selection valve to the suction motor. The liquid and solid components of the suction current enter the collection vessel
below the separation.
While the particles sediment in the collection vessel, the liquid level rises depending on the suction volume. As soon as a certain level is reached, the pump motor
is started for a certain period of time via a conductivity probe. The pump delivers the pre-cleaned liquid to the water outlet.
Waste water coming from the mouth rinsing basin is fed directly into the drain.
When the maximum level is reached, the probe prevents the separation chamber from flooding by closing the place selection valve (emergency stop). This
prevents liquid from reaching the suction machine.
1 Device description
2 Connection data
3 Separate collection of electrical/electronic equipment (WEEE)
9
4 Follow instructions for use
10
5 Date of manufacture
11
6 Serial number
4
7 Manufacturer
3
8 Item number
9 CE mark
8
10 Protection class II
11 Applied part type BF
Example picture
MULTI SYSTEM TYP 1 ECO Light
Cover:
Cover (optional)
Module 2
Air/water separation:
> Collection vessel
> Separation
> Station selection valve
Product description | EN
9