Inform the dentist about product function, operation, care and warranty conditions.
17
Complete the installation report and device document and return them to METASYS (installation@
metasys.com)
Carry out a normal operation test
18
5.3.1.
Installation and assembly of optional accessories, retrofit parts and spare parts
Assembly, modifications and repairs may only be carried out exclusively by authorised specialist personnel (see 3.2. Safety instructions)!
For further information and assistance in carrying out repairs, retrofitting, fault analyses, etc., the METASYS technical customer service
is also available!
5.3.2.
Connections with other devices
Connecting the METASYS device to other devices or systems can be dangerous. Therefore, it must be ensured that no hazards arise for the user or the patient
and that the environment is not affected. The specifications of the manufacturer of the device or system to be connected must be observed.
5.4.
Electronics
The mains connection may only be carried out by a qualified electrician. The electrical installation must be carried out in accordance with the applicable local
regulations. Before connecting to the mains, compare the rated voltage on the device type plate with the mains voltage.
5.4.1.
Electrical connections
Danger:
The supply voltage must be taken from a safety transformer that complies with the requirements of IEC 601-1 / VDE 0750 Part 1 / DIN
EN 60601-1 and IEC 60742 + A1 / DIN EN 60742.
Danger:
Fuses may only be replaced by the same type!
5.4.1.1. MULTI SYSTEM TYP 1 ECO
4
2
3
EQUIPMENT LOGBOOK
MONTAGEMELDUNG
Berechtigt zur Garantie
Bitte ausfüllen und retournieren
Für den Techniker | For the technician
Gerät, Seriennummer | Equipment, Serial no.
META Air 250,
Datum Inbetriebnahme | Date of first operation
d
x x
d
Techniker | Technician
Max Mustermann
E-Mail
max.mustermann@gmail.com
Depot | Dental Dealer
Depot Max Mustermann
Händler | Dealer
Depot Max Mustermann
max.mustermann@gmail.com
Depotstempel & Unterschrift Dental Dealer Stamp& Signature
METASYS Medizintechnik GmbH | Florianistraße 3, 6063 Rum bei Innsbruck, Austria | Phone: +43 512 205420 | info@metasys.com | www.metasys.com
see 7.2.3. Normal operation test
1
Main board
2
Diagnostic board
3
Module 2
4
Stackable switch and suction machine isolating
relay
SV3
Connector for power supply (24 V AC)
SV5
Connection to the diagnostic board (power supply
for motor and solenoid valve in module 2)
SV6
Connection to the diagnostic board (probes in
1
module 2)
SV7
Connector for stacking signal (12 - 24 V AC or DC)
F1
Main fuse T3, 15 A/UN 250 V/ ICN 35 A
Preparation for use
|
INSTALLATION PROOF
Entitles to warranty
Please complete and return
CS, ES, FI, FR, IT, PT,... : www.metasys.com
Für die Zahnarztpraxis | For the dental surgery
Bitte bestätigen Sie, dass Sie Ihr Techniker über folgende wichtige Punkte
DM-001234
informiert hat:
Please confirm that your technician has informed you about the following
important points:
Produktfunktion, -bedienung und Pfl ege
Fonctionnement, utilisation et entretien du produit
m
x x
m
y
2 0 2 0
y
y
y
Garantiebestimmungen: Einhalten der Wartungsintervalle, Betrieb und
Reinigung mit vom Hersteller empfohlenen Präparaten, Wartungsdoku-
mentation und Rücksendung der Montagemeldung
Warranty guidelines: Keeping service intervals, Operation and cleaning
with preparations recommended by the manufacturer, Service documen-
tation, Return of installation proof
Zahnarztpraxis | Dental surgery
Dr. Hans Zahn
E-Mail
zahn@praxiszahn.com
Gerätestandort | Place of installation
Den umseitigen Hinweis zum Datenschutz habe ich zur Kenntnis genommen.
I have taken note of the overleaf note on data protection.
Dr. Hans Zahn
Musterstraße 10, 1010 Wien
Zahnstraße 2, 1010 Wien
Österreich
Österreich
zahn@praxiszahn.com
www.mustermann.at
www.drzahn.at
Praxisstempel & Unterschrift Dental Surgery Stamp & Signature
installation@metasys.com
Fax: +43 512 205420-1123
EN
15
Need help?
Do you have a question about the MULTI SYSTEM TYP 1 ECO and is the answer not in the manual?
Questions and answers