Reversing Jaws - Grizzly G0600 Manual Insert

Reversing Jaws

To reverse the jaws:
1.
DISCONNECT LATHE FROM POWER!
2. Unbolt, then flip the jaw as shown in Figures
20-23, then re-tighten.
Figure 20. Reversing jaw step 1.
Figure 21. Reversing jaw step 2.
-28-
Figure 22. Reversing jaw step 3.
Figure 23. Reversing jaw step 4.
3.
Repeat these steps for the other two jaws.
G0600 20" x 60" Big Bore Lathe