Download
Share
Print this page
  1. Manuals
  2. Brands
  3. Henderson Manuals
  4. Door Opening System
  5. ROOMFLEX 40
  6. Fitting instructions manual

Henderson ROOMFLEX 40 Fitting Instructions Manual

Hide thumbs
1
2
3
4
5
6

Advertisement

Quick Links

Download this manual
ROOMFLEX 40
Kit Short Code
Door Configuration
HRP2/1
2+1
2+1 KIT CONTENTS
Top Pivot x 2
Bottom
Intermediate
Pivot x 2
Hinge
Handle Set x 1
It is recommended that a light smear of general purpose grease is applied to all bolts prior to assembly.
SYSTEM OVERVIEW AND DOOR CONFIGURATIONS
Folding Direction
= Flush bolt
FITTING INSTRUCTIONS
KIT AND DOOR SPECIFICATION
Max. Door Height
3000mm
Wrapped Hanger
Hinge x 1
2, 3 & 5mm
Flush
Bolt Set x 1
Max. Door Width
Max. Door Thickness
838mm
TOOLS REQUIRED
12mm
24mm
DIAGRAM 1
FINISHED OPENING WIDTH (W)
HINGE HANDLE
6
DOOR 1A
DOOR 2A
JAMB
3
TOP PIVOT
11
WRAPPED HANGER HINGE
2
1
35-44mm
40kg
MIDSET HINGE
TOP PIVOT
MIDSET HANDLE
HINGE
MIDSET HINGE
13mm
BOTTOM PIVOT
6
3
DOOR 1B
JAMB
TOP PIVOT
11
1
WRAP AROUN
HING
FB110 FLUS
(X2)

Advertisement

loading
Need help?

Need help?

Do you have a question about the ROOMFLEX 40 and is the answer not in the manual?

Questions and answers

Related Manuals for Henderson ROOMFLEX 40

Summary of Contents for Henderson ROOMFLEX 40

  • Page 1 ROOMFLEX 40 FITTING INSTRUCTIONS KIT AND DOOR SPECIFICATION Kit Short Code Door Configuration Max. Door Height Max. Door Width Max. Door Thickness HRP2/1 3000mm 838mm 35-44mm 40kg 2+1 KIT CONTENTS TOOLS REQUIRED WRAP AROUN HING MIDSET HINGE 12mm TOP PIVOT...

  • Page 2: Frame Dimensions

    Note: Ensure opening is square, level and all load bearing areas are suitable for weight of system. Ensure there is sufficient strength in structure above the opening to take concentrated weight of doors when open. Roomflex 40 provides +/- 5mm of horizontal adjustment. Ensure doors are measured accurately prior to installation.

  • Page 3: Side View

    SECURE TRACK SLIDE PIVOT POSITION TIMBER HEADERS AS INTO PLACE. BLOCKS FLUSH PER THE BELOW. TO FRAME. DT - 6 SECURE IN PLACE. INSTALLATION 1. Ensure that you have all the required parts. Unpack the com- ponents and identify the parts. Lay the parts on the ground in the same con guration as they will be when installed.
  • Page 4 FLUSH PULL ROUTING DETAIL ROUTE FLUSH BOLTS (SEE DIAMGRAM 1 FOR LOCATION). SECURE FLUSH BOLTS USING 30MM SCREWS PROVIDED. DOOR HINGES & OVERVIEW DIAGRAM 4 20mm 20mm 20mm JAMB REBATE WRAPPED HANGER HINGE SET 110mm JAMB JAMB PIVOT SET PIVOT SET 100mm 100mm HANDLE HINGE SET...
  • Page 5 RAISE DOOR 1A & 1B 5MM FROM SLIDE STRAP BOLT THROUGH FLOOR. UNSCREW NUT, SLIDE STRAP BOTTOM HINGE AND INTO LINK BOLT THROUGH HINGE AND ARM. TIGHTEN WITH 5MM ALLEN REATTACH NUT. TIGHTEN WITH 5MM KEY. ALLEN KEY. Note: Ensure there is a 2mm gap between the top of the hinge and the...

  • Page 6: Height Adjustment

    Use hinge handle to folding doors bolts bolts pull Door 1 and Door 2 into fully closed position P C HENDERSON LTD UK SALES IRELAND SALES INTERNATIONAL SALES 370970 Durham Road, Bowburn, t: +44 (0) 191 377 7345 t: +353 (0)1 643 6816...

This manual is also suitable for:

Hrp2/1