Datalogic Compact 2D Reader Matrix-2000 Reference Manual page 84

8
Parameters to verify/modify:
Operating Mode
Calibration
Communication
Ethernet
Fieldbus
Reading System Layout
Image Processing
1D & 2D, Postal Codes
Data Collection
Digital I/O
Match Code
Miscellaneous
Symbol Verification
LEDs And Keypad
74
Sets the parameters which customize the reader operating
mode starting from three main modes:
One Shot: acquires a single image based on the selected
value for the Acquisition Trigger and Acquisition Trigger
Delay.
Continuous: continuously acquires images with a rate up to
the maximum allowable frame rate per second for the
given sensor depending on the decoding time and the
Region of Interest settings.
Phase Mode: acquires images during the reading phase
depending on the selected value for the Acquisition Trigger
and Acquisition Trigger Delay. The Reading Phase-ON
and Reading Phase-OFF events mark respectively the
beginning and end of the reading phase.
Calibrates the acquisition parameters to maximize the
reading performance (see par. 8.4.3).
Configures the parameters relative to each serial port
regarding the transmission, message formatting and string
receiving.
Any change to
parameters (baud rate, data bits, etc.) is effective as soon
as the reader is disconnected from VisiSet™.
Sets the parameters related to the Ethernet interface and
to its communication channels.
Sets the parameters related to the External Fieldbus
interface through the CBX500 and to its communication
channels.
Allows configuring the device according to the desired
layout: Standalone, or Master/Slave RS232
Sets the image processing parameters shared by all
available symbologies.
Sets the characteristics of the code symbologies to be
read.
Defines the code-collection parameters and the output
message format.
Configures the reader input/output parameters.
Allows setting a user-defined code and relative parameters
to which the read code will be compared (matched).
Sets the reader name and the saved image format.
Sets the parameters relative to the various specifications in
the Standards which regulate code validation.
Sets the X-PRESS™ LED and Keypad parameters related to
their selected Functions: Beeper, Autolearning, Positioning,
etc.
MATRIX-2000™ REFERENCE MANUAL
the VisiSet™ communication port