Pc Health Status - Gigabyte GA-K8V Ultra-939 User Manual

PC Health Status

CMOS Setup Utility-Copyright (C) 1984-2004 Award Software
Vcore
DDR25V
+3.3V
+12V
Current CPU Temperature
Current CPU FAN Speed
Current SYSTEM FAN Speed
CPU FAN Fail Warning
SYSTEM FAN Fail Warning
CPU Samrt FAN Control
: Move Enter: Select
F5: Previous Values
Current Voltage (V) Vcore / DDR25V / +3.3V / +12V
Detect system's voltage status automatically.
Current CPU Temperature
Detect CPU temperature automatically.
Current CPU/SYSTEM FAN Speed (RPM)
Detect CPU/system fan speed status automatically.
CPU/SYSTEM FAN Fail Warning
Disabled Disable CPU/SYSTEM fan fail warning function. (Default value)
Enabled Enable CPU/SYSTEM fan fail warning function.
CPU Smart FAN Control
Disabled Disable this function.
Enabled Enable CPU Smart Fan control function. (Default value)
a. When the CPU temperature is higher than 60 degrees Celsius, CPU fan will
b. When the CPU temperature is between 50 and 60 degrees Celsius, CPU
c . When the CPU temperature is between 40 and 50 degrees Celsius, CPU
d. When the CPU temperature is lower than 40 degrees Celsius, CPU fan will
PC Health Status
OK
OK
OK
OK
83°C
3125 RPM
0 RPM
[Disabled]
[Disabled]
[Enabled]
+/-/PU/PD: Value
F6: Fail-Safe Defaults
run at full speed.
fan will run at high speed.
fan will run at medium speed.
run at low speed.
- 49 -
Menu Level
[Disabled]
Don't monitor
current fan speed
[Enabled]
Alarm when FAN stops
F10: Save ESC: Exit
F7: Optimized Defaults
Item Help
F1: General Help
BIOS Setup