7) DPS_FAN (DPS Fan Connector)*
If you installed wrong direction, the DPS fan will not work. Sometimes will damage the DPS fan.
(Usually black cable is GND)
8) FDD (Floppy Connector)
The FDD connector is used to connect the FDD cable while the other end of the cable connects to
the FDD drive. The types of FDD drives supported are: 360KB, 720KB, 1.2MB, 1.44MB and 2.
88MB. Please connect the red power connector wire to the pin1 position.
"*" Only for GA-K8VNXP-939.
1
Pin No.
1
2
34
33
2
1
- 25 -
Hardware Installation Process
Definition
+12V
GND