Step 2: Installing Cool-Plus (Northbridge Cooling Fan); Step 2-1: Installing Cool-Plus; Step 2-2: Removing Cool-Plus; Step 3: Install Memory Modules - Gigabyte GA-K8V Ultra-939 User Manual

Step 2: Installing Cool-Plus (Northbridge Cooling Fan)

Step 2-1: Installing Cool-Plus

Step 2-2: Removing Cool-Plus

Step 3: Install Memory Modules

Before installing the memory modules, please comply with the following conditions:
1. Please make sure that the memory used is supported by the motherboard. It is recom-
mended that memory of similar capacity, specifications and brand be used.
2. Before installing or removing memory modules, please make sure that the computer
power is switched off to prevent hardware damage.
3. Memory modules have a foolproof insertion design. A memory module can be installed
in only one direction. If you are unable to insert the module, please switch the direction.
The motherboard supports DDR memory modules, whereby BIOS will automatically detect memory
capacity and specifications. Memory modules are designed so that they can be inserted only in one
direction. The memory capacity used can differ with each slot.
GA-K8VNXP-939/GA-K8V Ultra-939 Motherboard
1. To attach Cool-Plus
to a heatsink, align the
extensions on both
sides with the grooves
i n t h e h e a t s i n k a s
shown. Firmly press
down until it snaps into
position.
Before proceeding, first check to make
sure that the fan's power cable is
disconnected. Then, while applying
pressure to the top of the fan, carefully
use a screwdriver to dislodge the
extension on one side.
- 16 -
2. Once the fan is prop-
erly affixed onto the
h e a t s i n k , p l u g t h e
power cable into the
NB_FAN connector.
Exerting too much pres-
sure on the fan during
removal might cause
the side extensions to
break-off.
Notch
DDR